Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
The OUTPUTS you discuss are for the Aquero 5 only, PWM 1&2 and the two position relay switch. Not the Multiswitch.You can control the Multiswitch with 2012.
All the outputs are listed under Switch Outputs and relays under the "Outputs" tab. You can also set controllers to switch each output on the Multiswitch. Not sure what is missing as never used the old software but if there is anything then it wil come in time I am sure. Also you can as far as I know use the Script Generator to create and run scripts for your LED's. I would just like the addition to be able to use the multiswitch front buttons with the software at the same time but I beleive it is either one or the other....???
What version of AIDA64 do you have as the newer versions now have a "Sensor Panel" which is completely customizable. AIDA64 has always had the OSD and Desktop Gadget which are similar to the OHM widget unless I am missing something. Must admit I have not used OHM for a long time but always thought AIDA64 was much better. Each to their own though.
The plans for the Overview Pages in Aquasuite as far as I remember is that you will be able to have them display directly on your desktop in future updates of Aquasuite.
Erm, would you be so kind to sum up actual problem into one or two sentences. Thanks!
Aquasuite 2012 b15 and b16 will not run at the same time with Aquasuite 4.72.What are the plans to include Multi swtch in AS2012?
The multiswitch runs fine with 4.72 aquasuite, we do not include it in aquasuite 2012.
The OUTPUTS you discuss are for the Aquero 5 only, PWM 1&2 and the two position relay switch. Not the Multiswitch.
The Multiswitch cannot be controled with current b16 AS2012.
I have AIDA64 Extream edition and current. the OSD is clunky and did not work. Yes I tried all of the WMI etc stuff talked about in other posts. Nothing worked.
The multiswitch runs fine with 4.72 aquasuite, we do not include it in aquasuite 2012.What are the plans to include Multi swtch in AS2012?
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »chippie« (8. August 2012, 23:28)
Very Interesting!The OUTPUTS you discuss are for the Aquero 5 only, PWM 1&2 and the two position relay switch. Not the Multiswitch.
The Multiswitch cannot be controled with current b16 AS2012.
I have AIDA64 Extream edition and current. the OSD is clunky and did not work. Yes I tried all of the WMI etc stuff talked about in other posts. Nothing worked.
The multiswitch runs fine with 4.72 aquasuite, we do not include it in aquasuite 2012.What are the plans to include Multi swtch in AS2012?
I am a little confused, perhaps I am misunderstanding something but I can "control" my Multiswitch from 2012.
[attach]3323[/attach]
[attach]3324[/attach]
EDIT: Just to add mine is conneced via the AquaBus and not USB header.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »chippie« (9. August 2012, 11:01)
Sebastian, I think what you ment to say is that MultiSwitch USB support will not be in AS2012, but Multiswitch Aquabus is supported.Aquasuite 2012 b15 and b16 will not run at the same time with Aquasuite 4.72.What are the plans to include Multi swtch in AS2012?
The multiswitch runs fine with 4.72 aquasuite, we do not include it in aquasuite 2012.
I know Multiswitch is not working in 2012.
Do you plan on working it into the AS2012 in the future? Aquacomputer has made the investment in the Hardware. Not including it into the new software and continuing the support for a unique product would be a mistake. No other company makes a unit like it.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »chippie« (19. August 2012, 21:03)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »chippie« (20. August 2012, 00:21)
-