• 14.10.2025, 11:52
  • Register
  • Login

  • You are not logged in.

 

New: aquasuite 2017-3.2

MP7

Junior Member

Monday, November 13th 2017, 6:39pm

Yes that's what I thought as well about not being same number but anyway, on aquabus device list is empty.

Shoggy

Sven - Admin

Tuesday, November 14th 2017, 2:49pm

And you also have both devices connected via aquabus? On the aquaero you have to use the aquabus highspeed port.

Do you use a 3-pin or 4-pin cable for the aquabus?

MP7

Junior Member

Tuesday, November 14th 2017, 9:07pm

Yap it is on aquabus highspeed via 4 pin cable.

sebastian

Administrator

Wednesday, November 15th 2017, 6:23am

Quoted from "MP7"

Yap it is on aquabus highspeed via 4 pin cable.
Have both devices the newest firmware? 1011 (mps) and 2011 (aquaero)

Have you powerd off your system completely (unplug psu power cable) after the firmware update?

MP7

Junior Member

Wednesday, November 15th 2017, 7:59am

Aquaero says 2011 and mps 1011.
No I didn't do that.

sebastian

Administrator

Wednesday, November 15th 2017, 10:22am

Quoted from "MP7"

Aquaero says 2011 and mps 1011.
this are the newest versions


Quoted from "MP7"

No I didn't do that.
you have to do this after a firmware update or wiring modification.

Dundys

Full Member

Wednesday, November 15th 2017, 2:42pm

I just updated to new auqasuite 2017-3-1 and it seem to fix the flow issue :thumbsup:

Does the new aquasuite 2017-3-1 requires again all of the devices to have their firmware updated or only aquaero?




Thank you

This post has been edited 1 times, last edit by "Dundys" (Nov 15th 2017, 2:47pm)

sebastian

Administrator

Wednesday, November 15th 2017, 2:45pm

from 2017-3 to 2017-3.1 only the mps and aquaero needs an update.

InfoSeeker

Senior Member

Wednesday, November 15th 2017, 2:47pm

Quoted from "sebastian"

Have both devices the newest firmware? 1011 (mps) and 2011 (aquaero)


I show 1010 (mps) and 2010 (aquaero), and both indicate the latest firmware is installed.
Has there been an aquasuite update already? I was expecting one on the 21st per Shoggy's original post.

Edit: Ah, went back to Shoggy's original post and see the text was modified to indicate an update available now. *sigh*
Edit 2: The download page does not show show the version #. We need better notification and indication please.

This post has been edited 3 times, last edit by "InfoSeeker" (Nov 15th 2017, 3:16pm)

Dundys

Full Member

Wednesday, November 15th 2017, 2:48pm

Quoted

from 2017-3 to 2017-3.1 only the mps and aquaero needs an update.
Ahh, so I need to update my High speed usb flow meters :thumbsup:

Thank you

Dundys

Full Member

Wednesday, November 15th 2017, 2:50pm

Quoted

Has there been an aquasuite update already? I was expecting one on the 21st per Shoggy's original post.
Yap, there is a new update that seem to fix the issues..nice :)

Dundys

Full Member

Wednesday, November 15th 2017, 2:57pm

This aquasuite 2017-3-1 seem to work much smoother as far is sensitivity to flow rate :P :thumbsup:

Thank you

MP7

Junior Member

Wednesday, November 15th 2017, 6:37pm

Quoted from "sebastian"


you have to do this after a firmware update or wiring modification.
Thx it works now! Very happy, nice update you did guys! :thumbsup:

Cozmo85

Newbie

Thursday, November 23rd 2017, 3:07am

figured it out

This post has been edited 2 times, last edit by "Cozmo85" (Dec 6th 2017, 3:40pm)

vabchgent

Junior Member

Wednesday, December 13th 2017, 1:38am

I am on Firmware 2017- 3.1 my 4th fan controller keeps saying overvoltage with only 2 fans attached. This is usually after power off, then on to the computer(meaning power supply totally off, then on). The aqua suite works fine , after I re update the firmware and install to old profile works fine . Any help greatly appreciated Aquaero 5 .

Shoggy

Sven - Admin

Wednesday, December 13th 2017, 2:52pm

This is no software problem for sure. Either there is something wrong with the attached fan or your aquaero is faulty in some way.

Kyle XY

Full Member

Thursday, December 28th 2017, 8:24am

Hello,

I found out a little bug, "U" is missing in word computer :


At last, systematically :
* AquaComputer service is not active,
=> I have to restart aquasuite with administrator rights
==> AquaComputer service is not active
===> "Start service" to be clicked
Is there a key to update in Windows registry in order to have AquaComputer service active by default ?

huanghetv

Junior Member

Thursday, December 28th 2017, 9:48am

Good,THX. :)

InfoSeeker

Senior Member

Thursday, December 28th 2017, 5:06pm

Quoted from "Kyle XY"

Hello,

I found out a little bug, "U" is missing in word computer :

At last, systematically :
* AquaComputer service is not active,
=> I have to restart aquasuite with administrator rights
==> AquaComputer service is not active
===> "Start service" to be clicked
Is there a key to update in Windows registry in order to have AquaComputer service active by default ?


Once activated, the computer service should remain activated.
The only exception I have experienced is after an aquasuite update the computer service may require reactivation.

Kyle XY

Full Member

Friday, December 29th 2017, 10:40am

Hello,

I thank you for your answer.
After checking services through command "services.msc", Aqua Computer Service is set on "Automatic" but I needed to start it.
I checked also Windows event viewer. It appeared two errors generated by the Service Control Manager. It reports (sorry if my translation is not right enough):
* The delay threshold of 30000ms is reached during the waiting of connection of Aqua Computer Service
* Service "Aqua Computer Service" was not able to start because of : the service did not answer fast enough during the launching or the control request".

Do you have a tip to do a correction ? :)

Similar threads