• 09.07.2026, 18:39
  • Register
  • Login

  • You are not logged in.

 

New: aquasuite 2017-3.2

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

InfoSeeker

Senior Member

Thursday, April 12th 2018, 1:40am

Quoted

Dear all

My device update software and firmware after

Not connected MPS

please help me

Thanks All
alexchan0829 has attached the following files:

MPS appears connected by aquabus.

MPS appears not connected by USB.
Are you using a USB hub?

This post has been edited 1 times, last edit by "InfoSeeker" (Apr 12th 2018, 1:42am)

alexchan0829

Newbie

Thursday, April 12th 2018, 4:38pm

Yes I have used USB hub

InfoSeeker

Senior Member

Friday, April 13th 2018, 12:14am

Sometimes a USB hub introduces a problem.
It may be useful to move one of the MPS unit USB cables from the hub and connect it direct to a motherboard USB port to see if it shows that way.

alexchan0829

Newbie

Friday, April 13th 2018, 2:14pm

感謝您的幫助和回复

InfoSeeker

Senior Member

Friday, April 13th 2018, 2:29pm

Quoted from "alexchan0829"

感謝您的幫助和回复
"Thanks for your help and reply"

You are welcome, hope it helped.

annihilation

Newbie

Friday, May 11th 2018, 2:58pm

I have one of these flow sensors: https://shop.aquacomputer.de/product_inf…roducts_id=2294

How do I go about getting this updated? It is currently showing up under Aquabus but says "The device has no USB connection to is not recognized by the system" and then Remove device from aquasuite.

Any ideas?

GTXJackBauer

Full Member

Friday, May 11th 2018, 4:20pm

Quoted from "annihilation"

I have one of these flow sensors: https://shop.aquacomputer.de/product_inf…roducts_id=2294

How do I go about getting this updated? It is currently showing up under Aquabus but says "The device has no USB connection to is not recognized by the system" and then Remove device from aquasuite.

Any ideas?


There is a proprietary cable that you need to purchase since it's sold separately (unfortunately) and plug it into the Flow Header behind the AQ. Once you've done that, you can check and is if it's working under the Aquaero tab ---> Sensors tab ---> Flow Sensors. Once there, you should be able to choose your flow meter.

This particular flow meter doesn't need any firmware updates. It's basically a plug n play flow meter. That's not to be said about the other flow meters they sell that need a Aquabus or USB connection which then do need to be updated via firmware.

This post has been edited 1 times, last edit by "GTXJackBauer" (May 11th 2018, 4:22pm)

annihilation

Newbie

Friday, May 11th 2018, 4:27pm

Interesting. It stopped working since the update which is why I was asking. I will check the connections.

wpuser

Senior Member

Monday, May 14th 2018, 3:48pm

Quoted from "annihilation"

I have one of these flow sensors: https://shop.aquacomputer.de/product_inf…roducts_id=2294

How do I go about getting this updated? It is currently showing up under Aquabus but says "The device has no USB connection to is not recognized by the system" and then Remove device from aquasuite.

Any ideas?


Are you sure the linked one is really your device?

The device in your link has no aquabus and no firmware. It cannot be updated.

This post has been edited 1 times, last edit by "wpuser" (May 14th 2018, 3:49pm)

CoAff

Junior Member

Thursday, May 24th 2018, 2:08am

Quoted from "wpuser"

Quoted from "annihilation"

I have one of these flow sensors: https://shop.aquacomputer.de/product_inf…roducts_id=2294

How do I go about getting this updated? It is currently showing up under Aquabus but says "The device has no USB connection to is not recognized by the system" and then Remove device from aquasuite.

Any ideas?


Are you sure the linked one is really your device?

The device in your link has no aquabus and no firmware. It cannot be updated.
The linked device uses this: https://shop.aquacomputer.de/product_inf…nu67405to0tgogk to communicate.

nhorn1983

Unregistered

Thursday, June 7th 2018, 1:22pm

is it possible to get an update on the software on the kryos kuplex block. i just installed my ryzen 2700x on an asus strix x470 gaming-f last night and the temp sensors are showing close to 100c this has to be a software bug as it was reading correctly the other day with an asrock x370 board. thank you

This post has been edited 1 times, last edit by "nhorn1983" (Jun 7th 2018, 5:30pm)

Shoggy

Sven - Admin

Thursday, June 14th 2018, 3:03pm

You can try to reset the device back to the factory defaults but I doubt that this is a software related problem. It is much more likely that the temperature sensor got damaged by installing the CPU again. The sensor is very sensitive to pressure and will show weird values when it gets damaged.

What is the exact variant of the block that you have? Maybe you can exchange it yourself.

Similar threads