Aquaero not saving profiles

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Miyoshi

Newbie

Aquaero not saving profiles

Sunday, December 23rd 2007, 7:23pm

Hi!

My Aquaero can't seem to be able to save my profiles. I have to manually load my profile in aquasuite every time I restart. I have tried to save data to EEPROM but it doesn't work. I get a shutdown error and my dual leds are blinking. I have tried reflashing via the newest aquasuite and resetted the EEPROM in both the aquasuite and manually by holding the set button for 3 seconds when restarting.

Aquaero is working perfectly only if I manually load my profile in Aquasuite but after restarting it acts very strange. I get a "Shutdown..." message. loading the profile1 or 2 in aquaero doesn't work. Default-profile works though and sets it back like it was when I started the system for the first time. Still after a shutdown the leds blinks red-blue and I get a Shutdown...flow 2 sensor message.

Can anyone please help.

Connections:
Aquaero <- USB -> Motherboard
Aquastream <- USB -> Motherboard
Aquaero <- Aquabus -> Aquastream

One more thing is that Aquaero doesn't recognize my Aquastram XT. It says "Too old or n. avail."

I'm using:
Aquasuite 4.51.00
Aquaero 4.13a firmware
Aquastream 1005 firmware

Tried to flash Firmware 1006 to Aquastream. I get a successful flash according to Aquasuite but it remains a 1005 firmware after restarting...

Rockwool

Newbie

Re: Aquaero not saving profiles

Sunday, December 30th 2007, 7:36pm

Quoted from "Miyoshi"

Hi!

My Aquaero can't seem to be able to save my profiles. I have to manually load my profile in aquasuite every time I restart. I have tried to save data to EEPROM but it doesn't work. I get a shutdown error and my dual leds are blinking. I have tried reflashing via the newest aquasuite and resetted the EEPROM in both the aquasuite and manually by holding the set button for 3 seconds when restarting.

Aquaero is working perfectly only if I manually load my profile in Aquasuite but after restarting it acts very strange. I get a "Shutdown..." message. loading the profile1 or 2 in aquaero doesn't work. Default-profile works though and sets it back like it was when I started the system for the first time. Still after a shutdown the leds blinks red-blue and I get a Shutdown...flow 2 sensor message.

Can anyone please help.

Connections:
Aquaero <- USB -> Motherboard
Aquastream <- USB -> Motherboard
Aquaero <- Aquabus -> Aquastream

One more thing is that Aquaero doesn't recognize my Aquastram XT. It says "Too old or n. avail."

I'm using:
Aquasuite 4.51.00
Aquaero 4.13a firmware
Aquastream 1005 firmware

Tried to flash Firmware 1006 to Aquastream. I get a successful flash according to Aquasuite but it remains a 1005 firmware after restarting...

I dont think that you should connect the aquastream to the MB thru USB. when you do have connectet it with the aquaero

TheRave

Newbie

Re: Aquaero not saving profiles

Wednesday, January 2nd 2008, 11:48am

Yeah, as far as I am aware you connect the pump EITHER to the motherboard via usb OR to the aquaero via the aquabus, NOT both.

Shoggy

Sven - Admin

Re: Aquaero not saving profiles

Wednesday, January 2nd 2008, 5:31pm

You can also connect the aquastream to USB and the aquaero.

Miyoshi

Newbie

Re: Aquaero not saving profiles

Thursday, January 3rd 2008, 3:41pm

ok, so Option 1 and 2 are correct while Option 3 is wrong???

Option 1
Aquaero <- USB -> Motherboard
Aquaero <- Aquabus -> Aquastream XT

Option 2
Aquaero <- USB -> Motherboard
Aquastream XT <- USB -> Motherboard

Option 3 is wrong? This is my current connection
Aquaero <- USB -> Motherboard
Aquastream XT <- USB -> Motherboard
Aquaero <- Aquabus -> Aquastream XT

Shoggy

Sven - Admin

Re: Aquaero not saving profiles

Thursday, January 3rd 2008, 3:53pm

Where is the problem?

That's the best combination because so you have ALL controlling and monitoring possibilities.

Miyoshi

Newbie

Re: Aquaero not saving profiles

Thursday, January 3rd 2008, 8:15pm

Thanks Shoggy. I was just not sure since I was told not to connect the Aquastream via USB while using aquabus.

There is no problem anymore. Everything works fine now. Im using option 3. =)