Thanks a lot!. It works... but there are some things that maybe can be improved.

First of all, when installing it for first time I didn't make a clean install. It was not a good option... because as adverted, the previous configuration doesn't work and I have to reconfigure aquasuite and aquaero completely. And when trying to configure the software sensors the program always crashed when clicking the "select data source" button.

So I've reinstalled it selecting the clean option and started from scratch. The problem of the crashing "select data source" button dissapeared.

But when trying to set the virtual temperature sensors, no is no available the option of use them to make another one. With the previous version I used a virtual temperature sensor to make the average water-air delta from my two radiator inlets water-air deltas, so it was possible to use two existing virtual temperature sensors as source for a new one. I miss that option.

In the overview pages I also had to re-set some data sources and update some displays with the "new" ones from the default page. It takes some time to get used to all the new sources from all the sensors, but it's great.

All other functions seems to be working perfectly.

For any other user upgrading to this version: don't forget to write down all your configuration in a paper so you can manually restore it. And I mean ALL your configuration, from the names of the temperature sensors attached to Aquaero to your alarm configurations, controllers... everything.

The standard install worked fine for me apart from having to change or re-do a few of the settings as is warned about.

The Virtual sensors can still be used in the same way, ie, using one to create another or stacking them. You just may need to save the settings to the Aquaero or restart aquasuite for the new virtual sensor to show up in the menu of the second.

installed, updated firmware of aquaero 5 and continuos aquasuite stopped working errors...
When i click into aquaero->fans section or mps->configuration section it crashes....
What can i do?
windows 8 here

make a clean install and try it again.

Citation de "Jakusonfire"

The Virtual sensors can still be used in the same way, ie, using one to create another or stacking them. You just may need to save the settings to the Aquaero or restart aquasuite for the new virtual sensor to show up in the menu of the second.

Thank you very much, you're right, it works!.

With the last version I can't remember that I needed to restart aquasuite neither save the values, but maybe my memory is not as good as it should be.
After two days of using this, with the exception of the recomendation of making always a clean install (don't doing so is worthless as you won't be able to use your previous profiles) and now the virtual temperature sensors back in all its functions, I can say that the new version is totally functional for me. Thanks

Citation de "sebastian"

make a clean install and try it again.

Already tried
It is possible that some libreries are corrupted? What aquasuite needs to work?

I'm having no luck so far with getting the curve controller to work in the new software. When I add a fan output the voltage goes to 0.
I did a clean install, so not sure yet what is going on.

Edit:I got it after a 2nd install.

On the download page for Aquasuite 2015, the claim is that Low Speed Aquabus is being discontinued and therefor no more use of the tubemeter. However, in the same text it states "Aquasuite 2015 can be used with the following devices: Aquaero 5/5, aquaduct mk 4/5 and eco series, aquastream, mps, power adjust 2/3, farbwerk and tubemeter."
If the Tubemeter is still usable with the Aquasuite 2015, please clarify how this is possible and if there are limitations using it. Also, does connecting the Tubemeter via the USB make it work?
Please clarify this discrepancy I am reading from the downloads page.
Thanks

Citation de "Goudman"

If the Tubemeter is still usable with the Aquasuite 2015, please clarify how this is possible and if there are limitations using it. Also, does connecting the Tubemeter via the USB make it work?

You have to connect the tubemeter via USB.

I've found a possible memory leak in aquasuite...

After some time playing (AC Unity) I closed the game and wanted to see the temps with my "very quiet profile". Also opened the task manager... and I found that.

Aquasuite was opened before opening the game. And before I closed it, memory leak reached more than 10gb... it doesn't seem to reach a final point, just continues eating more gb...

Windows 8.1 totally updated.

send us your exported overview page and your aquasuite data folder "C:\ProgramData\aquasuite-data" as a zip file to info@aqua-computer.de.

Here we dont have any memory issues after several hours of runtime.

Citation de "sebastian"

send us your exported overview page and your aquasuite data folder "C:\ProgramData\aquasuite-data" as a zip file to info@aqua-computer.de.

Here we dont have any memory issues after several hours of runtime.

Done.

By the way, since I've restarted the program after the memory leak, it has been running with zero problems.

With this new update what is the future for the aquabus low speed port? My aquaero 6 low speed port is currently just collecting dust since I don't own any of the compatible devices. I'm merely asking out of curiously if it will have a future purpose for us owners.

Citation de "amatthie"

With this new update what is the future for the aquabus low speed port? My aquaero 6 low speed port is currently just collecting dust since I don't own any of the compatible devices. I'm merely asking out of curiously if it will have a future purpose for us owners.

Citation de "Shoggy"

ATTENTIONWith the aquaero firmware 2000 the lowspeed aquabus port will not work anymore!

I read that as aquaero 7 will ship sans lowspeed aquabus port. I may be wrong, but that seems the logical conclusion,,, remove the function, then you can remove the hardware.

The low speed aquabus was only for multiswitch and tubemeter devices. Both device types was very limited with theirs aquabus funcionality and since long time EOL.

Some Findings of AquaSuite 15 - 1 (All testing with multiple fans). To begin AquaSuite is by far the best Fan/Pump controller software I've seen.


Basic Install and testing.

1. When upgrading the firmware of the Aquaero (5 LT) on completion the system does an uncontrolled shutdown of Windows 7 (Ultimate). Windows requires a recheck on startup. No issue with the system or Aquaero itself.
   
2. When adding a new item in the "My Page" for Overviews, the "Select Data" dialog box (after right mouse click) loses focus as the AquaSuite dialog takes back control. The 'Select Data" dialog disappears behind the AquaSuite Dialog box.
   
3. Under "Sensors" and "Temperature Sensors" there is no Aquaero 5 LT temperature only Fan Amplifier Temps 1 to 4. Should there be an Aquaero 5 temp?
   
4. The controller section can be difficult at first the curve control does not indicate the actual output % when an input temperature is at a certain degree. This can be confusing at first until various calibrations/options surrounding the output device (Fan/Pump) are taken into account.
   
5. Using the PWM fan header under "Advanced settings" seems to have different behaviors when selecting between Power control , Speed control and PWM control. PWM is able to achieve maximum Watts where the other two settings can not. The AMPS vary greatly between these options. The RPMs of the fans remain very low for both Power and Speed control with each reaching about 30 to 40% of the fans capability. This is with Max Voltage set at 12V. Speed Control with RPMs range set (e.g 1000 to 1800) can never reach the range with the RPM remaining around the 700 RPM Maximum. Power Control is set even lower RPMs. NOTE: These Fans are set as an OUTPUT to CPU Temp
6. The PowerAdjust Fan setup has no RPM range Under "Speed Control" option only a minimum and maximum power % exists

Most of the product is self explanatory with the various overview *.page templates requiring further study. Not sure if there is a larger library of these objects elsewhere (haven't gone looking as yet).


I'm yet to test an actual pump at this point and will in due course.

Thanks AquaComputer.

the version 2 ist online now, this is a bugfixed version.

Can we have some bug-fixes or changelog?.

Thanks!

in german here: aquasuite 2015 Version 2