• 25.07.2025, 03:44
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

Question about ultitube multitop

muqqenz

Newbie

Question about ultitube multitop

mardi 20 avril 2021, 13:20

Ok, the question might be dumb, but I can't for the life of me figure out how to fit the acryl tube into any of the fittings on the bottomside of this top.
This it the top: https://shop.aquacomputer.de/product_inf…roducts_id=3943

The tube seems to go in a few millimeters, but does not properly attach, meaning i's not secure at all, and a slight movement will dislodge it. I've used inhumane amounts of strength to push it into the fitting, but it just won't go in far enough. Am I missing something here? What am I doing wrong.

InfoSeeker

Senior Member

mardi 20 avril 2021, 15:55

You are probably having trouble getting the tube to go past the O-ring in the port. oring.jpg
Place a sheet of fine sandpaper on your desk, and holding the tube at about 45 degrees, lightly rotate/sand the outer edge of one end giving it a slight bevel.

Ce message a été modifié 1 fois. Dernière modification effectuée par "InfoSeeker" (20 avril 2021, 15:57)

Discussions similaires