• 31.07.2025, 08:44
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Updated aquasuite/firmware stabillity issues??

  • 1
  • 2

jpmboy

Full Member

Aquasuite screenshot 2

Dienstag, 27. November 2012, 01:59

Grabbing more memory resources over time. (after a brief game session). However, within a few minutes this dropped down to 302K private and 318K working. Learning more... if i turn on data capture for graphing with the built-in function (nice) AS gets more hungry.

Again -the software is working fine, no AS-caused crashes at all.
»jpmboy« hat folgendes Bild angehängt:
  • screen shot 2.jpg
AsRock E3Gen3, 2700k @4.6 with cuplex HF, 2 HD7970s with aquaC waterblocks, 16G GSkill 2133, TJ09, ST1500 ps, plextor 256 ssd, 2x1TB WD VRs raid 1, HP 30 inch. Aquacomputer 720XT Mk IV.

sebastian

Administrator

Dienstag, 27. November 2012, 07:11

The memory consumption is ok.
The aquasuite hold every value from each connected device with a history of 60minutes. Each value has a history of 3600 values + times.
The aquaero have ~200 Values.

When you use charts, the charts need also some memory and cpu time to display the graphs. When you use other monitoring software the memory/cpu load is similar to the aquasuite.

cc01

Full Member

Dienstag, 27. November 2012, 08:57

Zitat von »cpachris«

If I said that the sky was blue....I'm fairly certain cc01 would jump in and argue with me. I've gotten used to it. :huh:


Here's diplomacy: if it were blue I wouldn't argue. Actually it's cyan for most of the day. Various hues of yellow, red, orange or violet at dusk or dawn, black at night (depending on the light pollution). :)

I'm out of this thread as it seems I can never escape abuse for disagreeing with what doesn't make sense.

jpmboy

Full Member

Dienstag, 27. November 2012, 17:01

Zitat von »sebastian«

The memory consumption is ok.
The aquasuite hold every value from each connected device with a history of 60minutes. Each value has a history of 3600 values + times.
The aquaero have ~200 Values.

When you use charts, the charts need also some memory and cpu time to display the graphs. When you use other monitoring software the memory/cpu load is similar to the aquasuite.


Thanks Sanastian. Good software, nice work. The hardware/software package AQ offers is second to none.
AsRock E3Gen3, 2700k @4.6 with cuplex HF, 2 HD7970s with aquaC waterblocks, 16G GSkill 2133, TJ09, ST1500 ps, plextor 256 ssd, 2x1TB WD VRs raid 1, HP 30 inch. Aquacomputer 720XT Mk IV.
  • 1
  • 2

Ähnliche Themen