• 24.08.2025, 06:27
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

MPS 400 reporting 3.86 gal/hour?

Psychor

Full Member

MPS 400 reporting 3.86 gal/hour?

Montag, 11. März 2013, 15:57

I have an MPS 400 connected to a loop comprising a pump and filter. I use this for cleaning loops. The MPS 400 is rated for 80 - 400 liters per hour / 21 - 106 US liquid gallons per hour.

So why is it reporting 3.86 gal/hour? 8| Shouldn't it report 0 or something since it's below the minimum?

Psychor

Full Member

Montag, 11. März 2013, 16:12

While fooling around with the settings I selected "13/10 mm" (which by default was BLANK) and then hit "Import Calibration Dada." My flow shot up from 3.xx gal/h to 82 gal/h.

The manual says "13/10 mm" is the "type of fittings." Is that the ID of the fitting? I'm using 1/2" barb fittings.
»Psychor« hat folgendes Bild angehängt:
  • Clipboard01.png

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Psychor« (11. März 2013, 16:16)

Nihil Simile

Full Member

Fitting size

Montag, 11. März 2013, 22:41

13mm is equal to 1/2 inch, and 10mm is equal to 3/8 inch.

Psychor

Full Member

RE: Fitting size

Montag, 12. August 2013, 20:45

Zitat von »Nihil Simile«

13mm is equal to 1/2 inch, and 10mm is equal to 3/8 inch.
Thanks.

So I reset my MPS 400 today and now the drop down menus for "Load flow calibration curve" are completely empty. Any idea what's going on?

As a result my flow is showing ~6 gal/h which is incorrect. Prior to resetting my MPS 400 it was 80+ gal/h.
»Psychor« hat folgendes Bild angehängt:
  • mps_settings.jpg

Ähnliche Themen