Hello,
Considering the "integrated reservoir" flexibility of choice on the AMS Rad:
It is of my understanding, that if mounting the AMS Rad with integrated pump module in a "Vertical" position (with always the pump at lowest position) that we should possibly consider the additional reservoir option:
http://shop.aquacomputer.de/product_info…roducts_id=2779
My translation "This reservoir can be fitted at the end piece of the Airplex Modularity Series RADS with a water circuit. For upright use this reservoir can be used optimally in this position"
So my three questions I have:
1) By this method, could we also totally do away with having external reservoirs and use this also as a feed (fill port purpose) and bleed (air) at the top?
(Based on a vertical mount of a RAD)
My comment would be this should not stop one from also using in a vertical position...some further interesting flexibility...like it could be at lower part of the installation and used as a drain point also.
2) Visuals -> Does this only ship with stainless steel Top or does it also ship with a clear top and also have provision you add in a light source so we then have visual inspection without the need to pull it down to make maintenance inspections?
(Side benefit show off the fluid)
3) Dimensions/Size of this module?
As with most of the fantastic looking AC products...documentation is super secretive...well it appears that way to me. I think there is some room for aquacomputer to further develop this product and add more information on their website.
I am a newbie, so I apologies if I don't have answers, just some ideas. Lucky there is this Forum.
Cheers,