Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »mganddrea« (20. Juli 2013, 02:49)
Zitat
Hi all.
I'm new to the forum and have a few questions for some of the tekkies on here.
Welcome to the forum
Zitat
1. Will I be able to control the rpm of each radiator? (3 x 6 fan sets and 2 x 2 fan sets)
2. Will I be able to control that many led's?
3. What cables do I need to buy to connect them all together?
4. Can I power them off the psu and just connect the pwm bit to the Aquaero
5. Can I make pump sets (8 pumps in 4 sets) with identical settings as I don't wan't them running different speeds due to them being inline in the same pump top (bitspower dual)
I try to answering you...but...but...please always wait someone more expert as me
1) You can control rpm of each fans trough Aquaero and Power Adjust
2) Yes
3) A lot of cables included on the original box sent by Aquacomputer
4) What do you want power off from psu?? Are you talking about fans pwm??
5) I suppose, I'm not sure...however I suppose...I mean...if you set two D5 pump USB or not and you can control by Aquaero and Aquabus....I think aquasuite will see the pumps as only one and sw will set up to work at the same rpm. You can multiply four time and you'll get 8 pumps working as 4.
I repeat...wait for someone others more experienced as me. Hope to have been helpfull
Thanks
Full Member
Hi Namron.
I've already read your guide. I've ordered a few things based on your guide such as the waterblock. Excellent guide.
I didn't find anything with limits (other than power draw) that would not enable the pumps to all be run.
What are MPS Devices??
The Aquabus pumps are controlled and don't have a physical dial to change the speed. How would I change the speed if I can only have 4 plugged in?
Do you know what the standard speed will be on them?
I've attatched a pic of the pumps i'm using.
Thanks
Hi mganddreaYou can only control a maximum of 4 of these pumps on one Aquaero. To control another 4 pumps I assume you would simply have to use a second Aquaero. The pumps do not have a 'standard' speed but they are set at 100% output when they are shipped. To change this connect them via USB and change the output in the Aquasuite software.
Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »Jakusonfire« (23. Juli 2013, 23:14)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »mganddrea« (24. Juli 2013, 05:01)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Jakusonfire« (30. Juli 2013, 10:06)
-