Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »pitahbread« (4. August 2013, 02:54)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Jakusonfire« (23. August 2013, 05:14)
I had a power adjust 2 on mine but, i never got it to work so i just took it off.all i get is the flow 1&2 no 11Those settings don't change anything anyway. They are just the default pulse count but the USB flow sensor does its own processing. changing the pulse count number does not do anything, it is only for the older sensors.
It sounds like fully resetting the Aquaero and reinstalling Aquasuite is all there is left to try. It seems like either the Aquaero or Aquasuite is confused because it should not show those extra flow sensors 4, 5 and 6 unless you have renamed them to that, or you have poweradjusts connected.
I do have 3 Power adjust 2s connected along side my Aquaero 5 Pro. Should I still fully reset my Aquaero and re install Aquasuite?Those settings don't change anything anyway. They are just the default pulse count but the USB flow sensor does its own processing. changing the pulse count number does not do anything, it is only for the older sensors.
It sounds like fully resetting the Aquaero and reinstalling Aquasuite is all there is left to try. It seems like either the Aquaero or Aquasuite is confused because it should not show those extra flow sensors 4, 5 and 6 unless you have renamed them to that, or you have poweradjusts connected.
i guess nobody can help us with problem and nobody can tell me how you do a hard reset on the aquaero 5 xt. theres noway to reset the aquaero 5 xt without the software like on my aquastream xt pump u take and put black piece they give u on the temp sensors and it resets it.I had a power adjust 2 on mine but, i never got it to work so i just took it off.all i get is the flow 1&2 no 11Those settings don't change anything anyway. They are just the default pulse count but the USB flow sensor does its own processing. changing the pulse count number does not do anything, it is only for the older sensors.
It sounds like fully resetting the Aquaero and reinstalling Aquasuite is all there is left to try. It seems like either the Aquaero or Aquasuite is confused because it should not show those extra flow sensors 4, 5 and 6 unless you have renamed them to that, or you have poweradjusts connected.
how do i do a hard reset on the aquaero 5?
-