• 12.08.2025, 03:38
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

High flow meter usb not working after one day

delevic

Junior Member

High flow meter usb not working after one day

dimanche 27 octobre 2013, 00:49

Hi,

I have aquacomputer high flow meter usb. After a day of work, I stopped to get flow-information. I also noticed irregularities in the readings of water temperature. It is quite slow to react to changes and gave the incorrect temperature +-1.2c. I compared with three thermometers ..... I reinstalled netframework 4.5.1 , and aquasuite... What to do ?

Best Regards
Delevic

Ce message a été modifié 1 fois. Dernière modification effectuée par "delevic" (27 octobre 2013, 09:45)

b0nez

God

lundi 28 octobre 2013, 15:50

Simply open your flow meter. See if the prop which is inside get stuck. If so, remove an clean it.
:rolleyes:

sylvainp

Junior Member

RE: High flow meter usb not working after one day

samedi 2 novembre 2013, 06:40

Citation de "delevic"

Hi,

I have aquacomputer high flow meter usb. After a day of work, I stopped to get flow-information. I also noticed irregularities in the readings of water temperature. It is quite slow to react to changes and gave the incorrect temperature +-1.2c. I compared with three thermometers ..... I reinstalled netframework 4.5.1 , and aquasuite... What to do ?

Best Regards
Delevic
Go in the sensor pages and select the Flow sensor temp and look on the right you can make a temp offset.

delevic

Junior Member

samedi 11 janvier 2014, 13:56

It was hardware issue. It is fixed by aquacomputer :)

Discussions similaires