Hi!
I bought pump adapter for D5 pumps for aqualis base with fill level sensor (http://shop.aquacomputer.de/product_info…roducts_id=2926 ).
In the process of filling system distillate, it was found that this adapter has a water leak from the location of the board aquabus:

http://youtu.be/eWwXCZEovI8

What to do?

Silence on email, here you too silent. I bought your company's products to 350 euros (pump adapter for D5, aqualis base for pump adapters 450 ml with fountain effect and nano coating, aquaero 5 PRO, Aqua Computer D5 - 2 pcs.) I understand it as disrespectful to me as a your customer.

Your products are not passed the final test, because even a blind man would have seen any water leakage. What German quality do you say? Product assembly occurred with defects and gaps. Your fault and you are silent.

I'm on all Russian forums discourage maximum number of people from buying your products. Thank you for your help.

Easy to fix?
One o-ring does not have sufficient downforce.

I performed an experiment.
1. set board mps as it was originally installed, syringe hole on the top cover under the pressure of the water cast out.
Water began leak where there is a o-ring.
2. If the o-ring finger pressed to the body of the adapter, the water began leak from the other end of the sensor, which has not set the o-ring manufacturer.



I think that holes for the sensor made ​​too wide or ring too thin.


In general, the manufacturer must test the final product. And here we have a real defect. Manufacturer said not a word.

my mps board and mps board my friend. differences


support save silent

After all support me answer. And send a new adapter. Everything is fine!