In the past i used alot AC wc parts into my pc. After manny years on air setup, I want to make a small loop again, with some old parts i still have from AC and some new.

I bought an Pump module compact 600 Standard (Eheim 600), and i wondering what the use is, of the USB connector on that pump? Can i put this pump standalone in Aqausuite so i can control the speed? The manual which i got with it, is ment for the Aqaustream XT and not the Pump module compact 600 Standard. Also, connecting the usb cable to that pump totally difference with my eheim 600 pump?

Do i need to connect it this way (1)

positive on right side


or this way (2)

positive on left side


And which aqausuite does this pump work with? Aquasuite 4 or Aqausuite 2014?

Anyone know this?

Zitat von »Rostiger«

Hi,
postive on the right side is OK.
The pcb of the 600 module is the same then the XT, in all suite´s will be shown as XT- Modul not as 600er.
The Modul can work with all Aquasuites ( 4.72 and AS 2014 ).
To work with the Pump only you need is Molex and Usb and for Aquaero i think the Aquabusconektion.

Thanks, i will try 4.72 because i have an old Aquaero 4 which cant be connected to this pump, so i put them both on my mobo USB.