Hi, everybody!
I faced the following problem. I touched the computer from one case in another. Originally the sheaf from the Aquaero 5 PRO controler (master) + Aquaero 5 LT (slave) + the temp. sensor. Everything worked perfectly and without problems. In a new system I delivered to Aquaero 5 PRO + MPS 200 + temp. sensor. And here problems began. The stream sensor (MPS 200) in aquasuite is displayed normally, and here the controler isn't visible. I started understanding and I found out that the system (win 7 Pro) itself is operational doesn't define the controler. It is displayed as Unknown device error 43. I decided to return the controler to factory installations, having made everything on an intsruktion: I closed crossing points 5,6,7,8, rocowery mod and on it everything joined, the system doesn't see the controler, and on the screen now always this inscription. And with aquaero 5 LT everything is similar.
At inclusion there is the corresponding sound signal and changes nothing. I tried on two different computers, error 43 everywhere.
Very much I hope for your help, I thank in advance!