Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
I have an Aquaduct 360 XT MARK V, and yes, the two Plug & Cool inlet/outlet fittings at the base are G1/4 fittings that may be unscrewed and replaced with any G1/4 fitting you have.Hello,
I am interested in buying an Aquaduct 720 XT Mark V. It appears that two straight plug & cool fittings G 1/4 are already mounted onto the Aquaduct.
Should I be able to replace them by my own G1/4 connectors ?
Currently I have an EKWB Monoblock for the MoBO & CPU & two EKWB on the video cards, and then two Aquacomputer D5 pumps on an EKWB dual top, placed inside an airplex GIGANT 1680 with aquaero 6 PRO, copper fins. (retired the 360)Zitat
InfoSeekerX, for my information, what elements (radiators, blocks) did you have in your loop ?
Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »InfoSeekerX« (16. April 2015, 00:11)
Yes you can... series or parrallel. I use the EK-D5 Dual TOP G1/4 CSQ - Acetal to run my dual D5s in series (Installation Manual)Whooaa !!
Are you able to do the concatenation of pumps on a same loop ?
For that discussion I recommend you contact support: support@aqua-computer.deA big question : Aquaduct seems to have aluminum elements. It seems not compatible with copper blocks. Am I right ? What are the advice from the Aquaduct designers ?
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeekerX« (16. April 2015, 21:04)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeekerX« (17. April 2015, 22:42)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Kyle XY« (19. April 2015, 12:17)
-