• 20.08.2025, 14:33
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Aquaero 6 Pro + High Flow USB Flow sensor

bishop149

unregistriert

Aquaero 6 Pro + High Flow USB Flow sensor

Mittwoch, 24. Februar 2016, 00:13

I'm having some trouble understanding how to wire up these two up in the most efficient manner.

The manual for the high flow sensor states that I should connect it to a USB header on the motherboard
The Aquareo manual however states that the Aquabus connection can also transfer power when the forth pin is used.
If I connect the Flow Sensor via the aquabus using the a 4-pin connection do I still need to wire up the USB header?

If so I think this would be the best option, rather than use up a motherboard header needlessly.

Thanks in advance for any help!

Shoggy

Sven - Admin

Mittwoch, 24. Februar 2016, 09:58

If you use a 4-pin aquabus cable, you will not need the USB cable in addition. It is only required if you use a 3-pin aquabus cable because this one can not forward power from the aquaero to the sensor.

Ähnliche Themen