Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Yeah!! My loop have Aqualis 450ml reservoir with d5 pump top with flow meter and d5 usb aquabus pump -----> Soft tubbing to Cpu -----> 360 alphacool xt45 rad ------> Gpu ek 970 block --------> Alphacool xt45 rad -----> Back to the pump.
Before i had hard tubing but because of the low flow i took all the loop apart and clean each block and rad, change it to soft tubbing, nothing changed. I do have a flow meter from AQ but i need to find time to take apart the loop and fill it again.
Is just the other day randomly I could se the fountain effect running faster. The next day when I turned back on the Computer the flow change from the last day.... Is sad because is a nice reservoir and pump combo but the low flow that i can see kills everything on it.
Zitat
I was reading online and i may say that the D5 pump is connected with other molex connectors. Should i connect it alone directly to th psu to avoid any problem?? I dont know what to do or how can i go back to the high fluid performance.... Some suggestions??
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »InfoSeeker« (23. März 2017, 05:06)
Just came across this thread and I'm thinking just maybe, whether your pump itself its going down heal. You might have pump spinning and making all bunch of noise and it can even show you 100% or 12Vusage but is it really spinning at appropriate RPM.
Problem with pump itself not aquaero. Could be also something to do with pumps aquabus system that might be undervolting after while. If you don't have RPM reading I assume you don't or you would have mentioned, if there is any issue you might not be even getting the RPM you think you do.Zitat
So that means that the problem will be with the aquacomputer aquaero lt nstead of the D5 pump... Not really idea of how i can make it work in the appropiate speed that i want. As i told before i will tear down the loop this weekend the clean it one more time and check that their is no build up inside the blocks or any kind of build up.
Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von »Dundys« (24. März 2017, 05:48)
In the aquaero aquasuite in the mps part is reporting 4700 rpm so I think is not the problem. Maybe I have some problems with the d5 pump... Ahhhggg today I will tear apart the loop, I'm not waiting for the weekendProblem with pump itself not aquaero. Could be also something to do with pumps aquabus system that might be undervolting after while. If you don't have RPM reading I assume you don't or you would have mentioned, if there is any issue you might not be even getting the RPM you think you do.Zitat
So that means that the problem will be with the aquacomputer aquaero lt nstead of the D5 pump... Not really idea of how i can make it work in the appropiate speed that i want. As i told before i will tear down the loop this weekend the clean it one more time and check that their is no build up inside the blocks or any kind of build up.
The issue is that yesterday eventually when I reset the pc the pump started pushing plenty of agent and that i was ready to see the Fountain impact once more.
-