Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Dieser Beitrag wurde bereits 5 mal editiert, zuletzt von »Dundys« (12. April 2019, 01:45)
Zitat
Control
Each fan output can be configured individually. In addition to manual settings of the output power, automatic control is also possible. A setpoint controller with temperature setting and a curve controller are available. For the setpoint controller the desired temperature is being is set and the fan is controlled automatically as required. Experienced users can also optionally adjust the PID controller settings. The curve controller defines a power curve with temperature and power values via 16 freely adjustable points.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeeker« (12. April 2019, 02:36)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Dundys« (12. April 2019, 03:37)
Zitat
Monitoring
Four analogue temperature sensors and a flow sensor can be connected to QUADRO. Eight additional sensor values can be transferred from the computer to the QUADRO in the form of software sensors. For example, it is possible to control outputs directly according to the CPU or GPU temperature or to visualize the load by using LED strips.
Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »Dundys« (12. April 2019, 19:24)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »vvv850« (13. April 2019, 20:29)
Dieser Beitrag wurde bereits 6 mal editiert, zuletzt von »Dundys« (12. April 2019, 19:44)
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Dundys« (13. April 2019, 18:00)
Zitat
So where is the Quadro's Curve Control located thanks
Is it possible for you to take a quick snap shot of it
Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »Dundys« (13. April 2019, 20:01)
-