• 24.04.2019, 00:07
  • Register
  • Login
  • You are not logged in.

 

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Corsair hydro 100i rgb platinum connected/control led by aquaero & aquasuite

Tuesday, April 16th 2019, 3:29pm

Hi friends!!!

I would know if is posible connect an AIO Corsair Hydro 100i rgb platinum to Aquaero 6 LT and controlled by Aquasuite

Thanks for your help!! :thumbup:

This post has been edited 1 times, last edit by "japemo" (Apr 16th 2019, 7:47pm)

Tuesday, April 16th 2019, 5:55pm

The Aquaero 6 LT can not control LEDs.

To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.

Controlling the CPU Cooler RGB with Aquasuite is not possible.

This post has been edited 1 times, last edit by "Hufeisen" (Apr 16th 2019, 6:00pm)

Tuesday, April 16th 2019, 6:55pm

Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.

Tuesday, April 16th 2019, 8:26pm

The Aquaero 6 LT can not control LEDs.

To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.

Controlling the CPU Cooler RGB with Aquasuite is not possible.

Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
Sorry my smartphone corrected controlled by control led...

I want controlled pump and fans with aquaero and RGB led with Farbwerk...

Tuesday, April 16th 2019, 11:11pm

The Aquaero 6 LT can not control LEDs.

To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.

Controlling the CPU Cooler RGB with Aquasuite is not possible.

Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
Sorry my smartphone corrected controlled by control led...

I want controlled pump and fans with aquaero and RGB led with Farbwerk...


If by Farbwerk 360, yes you can with specific fans.

Check here for more info on that.

Tuesday, April 16th 2019, 11:15pm

The Aquaero 6 LT can not control LEDs.

To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.

Controlling the CPU Cooler RGB with Aquasuite is not possible.

Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
Sorry my smartphone corrected controlled by control led...

I want controlled pump and fans with aquaero and RGB led with Farbwerk...


If by Farbwerk 360, yes you can with specific fans.

Check here for more info on that.
Ok thanx!!!!

Wednesday, April 17th 2019, 2:59am

The Aquaero 6 LT can not control LEDs.

To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.

Controlling the CPU Cooler RGB with Aquasuite is not possible.

Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
Sorry my smartphone corrected controlled by control led...

I want controlled pump and fans with aquaero and RGB led with Farbwerk...


If by Farbwerk 360, yes you can with specific fans.

Check here for more info on that.
Ok thanx!!!!


Sorry for the confusion, I meant this one but the other one is a good read too regardless.

Wednesday, April 17th 2019, 8:06pm

I want controlled pump and fans with aquaero and RGB led with Farbwerk...
The Corsair hydro H100i RGB Platinum ships with Corsair ML or LL Fans, which are compatible with a Farbwerk 360.
A Splitty4 is required to connect the Fan RGB cable to the Farbwerk 360.
You can control the Fan speed with an Aquaero.

The Pump can not be controlled with Aquaero or Aquasuite software, because the pump only has an USB Connector.
Any setting for the pump (RGB and Speed) require the proprietary Corsair iCue software.

This post has been edited 4 times, last edit by "Hufeisen" (Apr 17th 2019, 8:42pm)