Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Dienstag, 16. April 2019, 15:29
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »japemo« (16. April 2019, 19:47)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Hufeisen« (16. April 2019, 18:00)
The Aquaero 6 LT can not control LEDs.
To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.
Controlling the CPU Cooler RGB with Aquasuite is not possible.
Sorry my smartphone corrected controlled by control led...Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
The Aquaero 6 LT can not control LEDs.
To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.
Controlling the CPU Cooler RGB with Aquasuite is not possible.
Sorry my smartphone corrected controlled by control led...Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
I want controlled pump and fans with aquaero and RGB led with Farbwerk...
Ok thanx!!!!The Aquaero 6 LT can not control LEDs.
To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.
Controlling the CPU Cooler RGB with Aquasuite is not possible.
Sorry my smartphone corrected controlled by control led...Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
I want controlled pump and fans with aquaero and RGB led with Farbwerk...
If by Farbwerk 360, yes you can with specific fans.
Check here for more info on that.
Ok thanx!!!!The Aquaero 6 LT can not control LEDs.
To control the Fan LED with Aquasuite, you need a Quadro or a Farbwerk 360. And you need a RGBpx Splitty4.
Controlling the CPU Cooler RGB with Aquasuite is not possible.
Sorry my smartphone corrected controlled by control led...Not just any fans. I think it's particular Corsair and NZXT fan's RGB that can be controlled only on the QUADRO.
I want controlled pump and fans with aquaero and RGB led with Farbwerk...
If by Farbwerk 360, yes you can with specific fans.
Check here for more info on that.
The Corsair hydro H100i RGB Platinum ships with Corsair ML or LL Fans, which are compatible with a Farbwerk 360.I want controlled pump and fans with aquaero and RGB led with Farbwerk...
Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von »Hufeisen« (17. April 2019, 20:42)
The Corsair hydro H100i RGB Platinum ships with Corsair ML or LL Fans, which are compatible with a Farbwerk 360.I want controlled pump and fans with aquaero and RGB led with Farbwerk...
A Splitty4 is required to connect the Fan RGB cable to the Farbwerk 360.
You can control the Fan speed with an Aquaero.
The Pump can not be controlled with Aquaero or Aquasuite software, because the pump only has an USB Connector.
Any setting for the pump (RGB and Speed) require the proprietary Corsair iCue software.
This is only a pump tach cable. This cable sends the pump speed RPM to a FAN Header. You can not control the pump with this cable.
• Connect pump tach cable to the CPU_FAN header on your motherboard (figure 1).
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Hufeisen« (26. April 2019, 18:49)
-