Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »airflow« (28. August 2020, 00:59)
The RGBpx effects from the sensor work without a Software when you use a Internal Sensor (from the hardware). You only have to connect USB to power the sensor. When the sensor is only connected via aquabus, the RGB LEDs are off.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »anub1s21« (2. September 2020, 20:23)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »SgtSixpack« (4. September 2020, 13:51)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »k2viper« (4. September 2020, 14:26)
Does the High Flow 2 (not the NEXT) have the ability to do system shutoff? The connector included in the picture looks like it has the appropriate motherboard connector.
Zitat
Water temperature - highly accurate and measured as swift as an arrow
The high flow 2 and the high flow NEXT feature a highly accurate and also extremely responsive water temperature sensor. This not only allows the water temperature to be determined but also, in combination with a second sensor, the power currently being dissipated by the cooling system.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeeker« (8. September 2020, 14:11)
The high flow NEXT also integrates a smart calibration fuction. This will allow you an automatic calibration of the two sensors against each other when the system is shut down for a given time. This function is a great improvement at the accurarcy but will only be available for the connected sensor at the high flow NEXT as values must be available also in stand-by of the system.
-