• 28.04.2024, 16:36
  • Registrieren
  • Anmelden
  • Sie sind nicht angemeldet.

 

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

MAJO

Junior Member

help for a newbie, aida64 and aquasuite

Dienstag, 28. Dezember 2021, 12:16

good morning, i have an aquaero and 2 next D5 pumps, and i would like to know how could i made for aquasuite read temps from aida64 to setup fans in aquaero.Where could i find the information please? thanks

etoel

Junior Member

Donnerstag, 30. Dezember 2021, 11:28

Hi and welcome.

You don't need aida64 to control your fans btw, connect them to aquaero and they will be available as fans. I recommend setting up a curve controller based on the coolant temp, but you can use fixed settings as well.

Donnerstag, 30. Dezember 2021, 17:02

Hi and welcome.

You don't need aida64 to control your fans btw, connect them to aquaero and they will be available as fans. I recommend setting up a curve controller based on the coolant temp, but you can use fixed settings as well.

I have not used aida64 for some years and I do not remember if you have to activate shared memory. If it does require activation, do so.
Aquasuite requires you activate 'Background service' from the 'Service' tab {service.jpg}
Aida64 should then list in the 'Data quick view' tab under 'Data from Aqua Computer service' {data.jpg}
If you see aida64 listed, then you can use sensors from it as a source for your fan controls.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeeker« (30. Dezember 2021, 17:03)