• 31.10.2025, 18:16
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Windows will not install because there is nothing connected to CPU Fan Header

WaterBoy61

Full Member

Windows will not install because there is nothing connected to CPU Fan Header

Sonntag, 24. Juli 2022, 23:13

I cannot install Windows 11 on my system because it keeps restarting back into the Bios when Windows goes through it`s restarts while installing OS. It is because the water pump is connected to the Octo when it needs to be on the mobo header. I posted a picture of the prompt from my Bios. I cannot change the setting to "ignore" in the Bios because every thing says N/A. I thought you all connect your pump to your control boards?
[/url][/img]http://i.imgur.com/lTSU5Jz.png

Remayz

Senior Member

Montag, 25. Juli 2022, 00:22

sometimes you have to trick it a bit. like.. setting the CPU fan header in bios as if you had a fan attached, enabling it.. then the other options appear and you can disable the fan error detection.

WinstonWoof

Full Member

Montag, 25. Juli 2022, 08:24

there will be a setting in the BIOS to disable this warning


My Youtube Aquasuite Playlist

Caldorian

Junior Member

Montag, 25. Juli 2022, 08:32

On my Asus board (x570 TUF), even though it says N/A, I can still still move the cursor to the CPU Fan option and select it to tell it to Ignore it.

InfoSeeker

Senior Member

Montag, 25. Juli 2022, 15:49

Hang a spare fan on the mobo port while you get things setup?

WaterBoy61

Full Member

Montag, 25. Juli 2022, 17:38

Zitat von »Caldorian«

On my Asus board (x570 TUF), even though it says N/A, I can still still move the cursor to the CPU Fan option and select it to tell it to Ignore it.
I got it fixed now. Took a while to figure that out. I thought the option could not be changed.

Caldorian

Junior Member

Montag, 25. Juli 2022, 21:11

Ya, it's definitely not intuitive. Took me a little while to figure it out as well initially.

Ähnliche Themen