• 18.06.2024, 07:39
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Missing sensors for HighFlow Next

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

Steiner_SE

Junior Member

Beiträge: 26

Missing sensors for HighFlow Next

Freitag, 21. April 2023, 09:50

Looking in AquaSite at the Octo, Leakshield and D5 Next there's no option to set the HighFlow Next as the source for flow rate and they all report the rate as 0.
Is this coming or do I need to make some kind of workaround?

sebastian

Administrator

Beiträge: 10 548

Freitag, 21. April 2023, 09:55

Please describe exactly which sensor is missing on which device.
Which source does not work with which device?


Take screenshots of your settings from the relevant devices.
In general, you cannot use flow sensors as a source for temperature control.

InfoSeeker

Senior Member

Beiträge: 1 766

RE: Missing sensors for HighFlow Next

Freitag, 21. April 2023, 13:03

Zitat von »Steiner_SE«

Looking in AquaSite at the Octo, Leakshield and D5 Next there's no option to set the HighFlow Next as the source for flow rate and they all report the rate as 0.
Is this coming or do I need to make some kind of workaround?

The default Flow sensor for the octo requires a physical connection between the octo and the high flow next.
The more common method used, if both have USB connections, is to Import the high flow next flow-data into one of the soft sensors on the octo [import_sensor.jpg]

Steiner_SE

Junior Member

Beiträge: 26

RE: RE: Missing sensors for HighFlow Next

Freitag, 21. April 2023, 20:33

Zitat von »InfoSeeker«

Zitat von »Steiner_SE«

Looking in AquaSite at the Octo, Leakshield and D5 Next there's no option to set the HighFlow Next as the source for flow rate and they all report the rate as 0.
Is this coming or do I need to make some kind of workaround?

The default Flow sensor for the octo requires a physical connection between the octo and the high flow next.
The more common method used, if both have USB connections, is to Import the high flow next flow-data into one of the soft sensors on the octo [[attach]10220[/attach]]
Oh, that seems to work fine. Thank you kindly.

Steiner_SE

Junior Member

Beiträge: 26

Freitag, 21. April 2023, 21:54

Zitat von »sebastian«

Please describe exactly which sensor is missing on which device.
Which source does not work with which device?


Take screenshots of your settings from the relevant devices.
In general, you cannot use flow sensors as a source for temperature control.
The Next isn't listed as an option, and all the available options gives a 0 flow response.


sens.jpg

sebastian

Administrator

Beiträge: 10 548

Samstag, 22. April 2023, 06:39

Zitat von »Steiner_SE«

The Next isn't listed as an option
this is correct, you can not connect the High flow next. This is the pysical 3 pin flow input.
And when you connect the Signal Output with flow input, you have to select 53068 (look at the manual).

Ähnliche Themen