Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Zitat
...in the pc70 system you sell ?
Zitat von »propurple«
hi ok we'll its coming to the time in the next week where im going to order everything
so basically im going to buy a lian li pc-70 and mod that,
im going to get the ac 360 kit, and build that in, when ordering the kit, ive noticed it comes with 1 xcpu cooler can i choose which one i want ?
whats the difference between the cuplex rev 1.1 over the rev 1.3 ?
do i need to buy a heatsink reteation plate for the back of the mb
what was the northbridge cooler for an asus pcdl ?
im going to buy 2 of the vrm coolers and put them next to each is Wärmeleitpaste Arctic Céramique ok for the job ? other, will the flow of water be ok, the setup will be 2 xcpu 1xnb and 2xvrm what order should i put them in for best setup ?
shoggy looking at the space help, one question tho i noticed the size was 108 x 108, what thickness is the metal being used? and are the screws suplied with the aqua pump long enough ?
i take it this the the spacer here http://www.shoggy.de/ac_forum/outtake_6g.jpg
the pump does this work better on the base of the case or higher up, if its on the base, i take it, that it needs to be drilled ?
Im also going to get the aquaero, does anything seperatly have to be purcahsed for this to work, or are all the temperature sensors and fan connectors included ?
Now probably the bit that im forgetting the most, connectors this is where my german isnt very good and cant work out what i need, what sort of connectors do i and tubing do i need to use the plug n cool ?
last question
for bluemotion what do i need to get, does it work best with clear tubing, then putting a neon light next to it, what color uvs are those is that just black light that ur using ?
ok anything else that im forgetting, sorry for all the questions i just dont want to forget anything, hate to order it all and forget a small part, then have to wait to reorder it.
Thanks
Zitat von »Shoggy«
The order list seems to be ok.
If I were you I would use the cuplex instead of the cuplex pro. The resistance of the pro is quite higher and you are going to use two of them... In my opionion that's not a good idea. It would work but the question is how it will affect water flow.
.
Zitat von »Shoggy«
A VRM (? *g*) colling block is available at Aqua Computer Berlin:
Copper version costs 17,90 Euro, aluminium 15,90 Euro. You should use thermal-glue to install them. But be warned: once installed it's really hard to get them off.
Hi Shoggy...
Is this only available from A-C Berlin or is it a standard A-C item? Is it long enough to use on a ASUS A8N-SLI board?
TIA
Zitat von »propurple«
I really just want to know the beginners guide on how to set this up.
Zitat
put all the cpu coolers and NB on top of the motherboard, connect all the tubing together.
Now for testing for leaks ? should i just connecting it all together with the motherboard in there, and just go for it ? or how should i test it ? rest the cpu coolers in the case, without the motherboard and check for leaks, then attached the parts to the motherboard ?
Zitat
Also i have the flow sensor to attach, im using the pc-70 case, with the same setup as shoggy, sorry for copying Wheres a good place to attach the sensor ? been looking for a decent place to put it, with out the tubing having to bend alot.
Zitat
For the water, its 98% distilled water, (which is the same as battery water right ?) and 2% AC. How much will i need for my system, i know the guide book gave a range, is it better to go for the high end ? its only going to 3 elements, 2x cpu and 1x NB.
Zitat
The aquaero temp sensors, how should they be attached ? if i want them to meseaure cpu temp, would i put them between the cpu cooler and cpu chipset ? otherwise how would you stick them down ?
Zitat
final questions, letting the machine run its self in, how do you get rid of air in the system ?
Zitat
Sorry for all the questions, thats all i the question i had !! just wanted to know all the answers before i started to put it all together !!!
Thanks
-