firmwareupdate (FW1.06) for tubemeter

Shoggy

Sven - Admin

Freitag, 2. Dezember 2005, 13:38

1

A few people had the problem that the tubemeter is showing a too high fill level. The new firmware fixes this problem.

You can download firmware 1.06 here.

You have to connect the tubemeter to a USB port if you want to flash it. Close all unnecessary applications, start the Aquasuite and flash the downloaded file.
After flashing the tubemeter it will log on to USB again; if not you have to shutdown your pc (off) and start it again.

Top_Nurse

Senior Member

Re: firmwareupdate (FW1.06) for tubemeter

Freitag, 2. Dezember 2005, 15:59

2

Zitat von »Weihnachts-Shoggy«

A few people had the problem that the tubemeter is showing a too high fill level. The new firmware fixes this problem.

You can download firmware 1.06 here.

You have to connect the tubemeter to a USB port if you want to flash it. Close all unnecessary applications, start the Aquasuite and flash the downloaded file.
After flashing the tubemeter it will log on to USB again; if not you have to shutdown your pc (off) and start it again.

So is there some kind of circuitry inside the Tubemeter casing? Or does the flash procedure just update the Aquasuite software?

x-stars

God

Re: firmwareupdate (FW1.06) for tubemeter

Freitag, 2. Dezember 2005, 16:11

3

Zitat von »Top_Nurse«

So is there some kind of circuitry inside the Tubemeter casing? Or does the flash procedure just update the Aquasuite software?

It updates the µC's flash with a new firmware (old firmware was 1.5 - you can see that only, when the tubemeter is connected to usb)

.

"Live free or die: Death is not the worst of evils."

Katzenfreund

God

Re: firmwareupdate (FW1.06) for tubemeter

Freitag, 2. Dezember 2005, 16:17

4

Zitat von »Top_Nurse«

So is there some kind of circuitry inside the Tubemeter casing? Or does the flash procedure just update the Aquasuite software?

If it would just update the Aquasuite, it woudn't be necessary to conect the tubemeter via USB.

So you see: There is a flash on the tubemeter.

Suche Bücher von Tanenbaum und Galileo (auch Video-Training) - bitte KM! [img] http://www.aqua-computer-berlin.de/logo.png [/img]

Top_Nurse

Senior Member

Re: firmwareupdate (FW1.06) for tubemeter

Freitag, 2. Dezember 2005, 16:55

5

Zitat von »Katzenfreund«

If it would just update the Aquasuite, it woudn't be necessary to conect the tubemeter via USB.

So you see: There is a flash on the tubemeter.

Wow! That Tubemeter is cheap for having a flash device inside it. :o

Katzenfreund

God