Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum.
Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert.
Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können.
Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang.
Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Howdy chaps just some advice. I have one PC that has been running for a while and I need to rebuild it so I can investigate some issues and attach the temp sensors near the intended measured components.
I have pretty minimal airflow in the case in an attempt to make things quite and as far as I can tell my temps all look ok. However my sensors are not really placed to give accurate measurements hence the rebuild.
As a guide the water seems to be cooled by 1-2 deg passively and I get a max flowrate of 38.61 l/h at the higher pump setting and 27.43 l/h at the default pump setting. I don't get much temp difference between the two settings.
I have many components in the case that are watercooled, 3 HD are included in that. Do you think the flowrates and cooling will be improved if I take 2 of the HD's out of the loop.
What flowrates are you guys getting with your setups.
Hi!
In my current setting I can't measure the flowrates, but the ADs are just a sort of pipe, atached to the hardrives.
So infact they don't influence the flowrate at all. Or atleast not measurable.
r4p
31.07.2025, 19:01
Sprache ändern
Registrieren
Anmelden
