aquagraFX G200 problem

Hapsbanan

Newbie

aquagraFX G200 problem

Samstag, 20. Dezember 2008, 21:32

Hello folks.

I seem to have a major problem with my aquagraFX G200 cooler on my Asus GTX260 TOP.
Looks like the cooler doesnt reach the GPU if i watch my temps.
In idle i get ~60c temps, and on load, it just bumps up to 115c in a few seconds and shuts down.

Anyone else having problem with this?
Any suggestions?

Regards.
//Hapsbanan

Shoggy

Sven - Admin

Sonntag, 21. Dezember 2008, 02:34

I would recommend to remove the block and check if everything had proper contact.

Also a possible reason for the bad temperatures could be that the screws around the GPU are not tighten strong enough. You could tighten them a little bit more and test if it would make a difference. If so, just continue but be careful!

Hapsbanan

Newbie

Sonntag, 21. Dezember 2008, 15:15

It only had contact to one small corner of the GPU, which resulted in massive overheating.
It was not possible to tighten the screws any more that I already did.

Shoggy

Sven - Admin

Sonntag, 21. Dezember 2008, 17:12

Mhhh, it might be also possible that your card is not 100% identical to the reference layout. We also had this problem with some HD4870 cards. They looked exactly the same but the height between the RAM and GPU was a little bit different.

Hapsbanan

Newbie

Sonntag, 21. Dezember 2008, 22:27

This is the gfx I got:
http://asus.com/products.aspx?l1=2&l2=6&…335&modelmenu=2

Other people who got problems with this card and the aquagraFX G200 cooler?

aquagraFX G200 problem

aquagraFX G200 problem

Ähnliche Themen