26.08.2025, 17:45
Sprache ändern
Registrieren
Anmelden
Sie sind nicht angemeldet.
Shoggy
Sven - Admin
Re: new: complete systems in aquaduct design
Samstag, 16. Juni 2007, 20:24
We have changed the G70 under consideration of your "aquatube wishes" once again. The aquatube is mounted in the top now, so one only loses two 5.25" bays. The problem "where to mount the pump?" was solved very well by our new mount for it. This mount will be also available separately as of Monday.
By the way, the complete water cooling is mounted at the top and so it is very simply to remove it from the case.
Here is a couple of photos:
By the way, the complete water cooling is mounted at the top and so it is very simply to remove it from the case.
Here is a couple of photos:
Halk
Junior Member
Re: new: complete systems in aquaduct design *upda
Samstag, 16. Juni 2007, 22:15
Ah, never thought of that, but I've never had a problem filling my pump, my Aquatube is mounted to the roof of my case.
Still very interested in the pump mounting.
Get it up on the shop with a load of pictures and specs so I can see if it'll work on a PA120.3
Still very interested in the pump mounting.
Get it up on the shop with a load of pictures and specs so I can see if it'll work on a PA120.3
Zitat von »Shoggy«
Halk
Junior Member
Re: new: complete systems in aquaduct design *upda
Sonntag, 17. Juni 2007, 07:34
With a shedload of pictures unlike the other new stuff that's been added to the catalogue 
I've been reliably informed that Shoggy himself will be taking no less than 6 pictures of it so that there can be no questions of how it fits, what it will fit to and what it won't fit to.
I've been reliably informed that Shoggy himself will be taking no less than 6 pictures of it so that there can be no questions of how it fits, what it will fit to and what it won't fit to.