Another Aquasuite Issue

ktseymour

Junior Member

Another Aquasuite Issue

Sonntag, 20. Dezember 2009, 17:30

The aquasuite software Is now taking Issue with working with the aquaero.

It says nothing Is connected?

I might have figured It out. You have to configure everything In the aquaero menu? Is this right Shoggy? I took a screen shot so you get a better Idea of what's going on, If It shows up proper

http://s922.photobucket.com/albums/ad63/UberTrooper/

Dieser Beitrag wurde bereits 5 mal editiert, zuletzt von »ktseymour« (20. Dezember 2009, 17:35)

ktseymour

Junior Member

Montag, 21. Dezember 2009, 19:49

Never mind :sleeping:

This Is a bad unit, I'll have to send It In for repair :cursing:

Weihnachts-Shoggy

Sven - Admin

Montag, 21. Dezember 2009, 23:02

Judging from that "yyyyyyyy" I would say the memory of the aquaero is totally messed up. I would recommend to perform a reset of the device: shut down the system, press and hold the middle button (set) and start the system. After 2 - 3 seconds you should read a reset message on the LCD.

It might be also a problem with the USB communication. If possible try another port on your board or a different cable. You can also use it for testing in another PC so you can check if the aquaero is OK or not.

ktseymour

Junior Member

Dienstag, 22. Dezember 2009, 01:29

I did a reset twice. It worked for a little while the first time, but the second time after boot-up the screen went blank, and a short while after that the screen started flickering on and off again. The unit Is completely dead now, wont even accept power any more.

I will have to RMA the unit. The only problem now Is I don't think I have my Invoice anymore?

ktseymour

Junior Member

Dienstag, 22. Dezember 2009, 01:59

The coolest thing! Gary from Sidewinder Is sending me an RMA so I don't have to send It all the way to the Shoggster

Thanks for the help Shoggy :thumbup:

Another Aquasuite Issue

Another Aquasuite Issue

Ähnliche Themen