• 21.08.2025, 08:39
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

conecting aqualis xt to aquaero 5 pro

Extreme-Moder

Newbie

conecting aqualis xt to aquaero 5 pro

Sonntag, 2. Dezember 2012, 23:19

hello

i got a aqualis xt nano and i conected that true usb but i want to change to aquabus cable so i got one but if i conect by aquabus the aquaero does not recognise the aqualis .

whit usb on everything works perfect but the thing is that i only have 1 usb on my board and i need that to the aquaero 5

edit. from aqualis byaquabus to aquaero needs to be on aquabus 1 or aquabus 2 ?

the manuals from aquacomputer dont state this for the aqualis they need to improve tutorials and manuals alot more

can some one help please ??

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Extreme-Moder« (2. Dezember 2012, 23:30)

Shoggy

Sven - Admin

Montag, 3. Dezember 2012, 10:22

Make sure that you connect it to the highspeed aquabus port on the aquaero.

Extreme-Moder

Newbie

Montag, 3. Dezember 2012, 11:43

hi

its conected to the hispeed aquabus but if i disconect the usb it desapears the aquasuite !

on aquasuite i chose the option priority aquabus but what is the port number ? at the moment its on 12 .

do i have to do anything elese for this to work ?

Shoggy

Sven - Admin

Dienstag, 4. Dezember 2012, 08:44

You will not see any special tab for the sensor. It only offers a sensor value. If you click on the white plus icon in the lower right corner of an overview page you can add a new element. In this list you should also be able to see the sensors value from the mps.

Ähnliche Themen