• 19.08.2025, 18:43
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

High flow meter usb not working after one day

delevic

Junior Member

High flow meter usb not working after one day

Sonntag, 27. Oktober 2013, 00:49

Hi,

I have aquacomputer high flow meter usb. After a day of work, I stopped to get flow-information. I also noticed irregularities in the readings of water temperature. It is quite slow to react to changes and gave the incorrect temperature +-1.2c. I compared with three thermometers ..... I reinstalled netframework 4.5.1 , and aquasuite... What to do ?

Best Regards
Delevic

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »delevic« (27. Oktober 2013, 09:45)

b0nez

God

Montag, 28. Oktober 2013, 15:50

Simply open your flow meter. See if the prop which is inside get stuck. If so, remove an clean it.
:rolleyes:

sylvainp

Junior Member

RE: High flow meter usb not working after one day

Samstag, 2. November 2013, 06:40

Zitat von »delevic«

Hi,

I have aquacomputer high flow meter usb. After a day of work, I stopped to get flow-information. I also noticed irregularities in the readings of water temperature. It is quite slow to react to changes and gave the incorrect temperature +-1.2c. I compared with three thermometers ..... I reinstalled netframework 4.5.1 , and aquasuite... What to do ?

Best Regards
Delevic
Go in the sensor pages and select the Flow sensor temp and look on the right you can make a temp offset.

delevic

Junior Member

Samstag, 11. Januar 2014, 13:56

It was hardware issue. It is fixed by aquacomputer :)

Ähnliche Themen