• 22.08.2025, 17:25
  • S’inscrire
  • Connexion

  • Vous n’êtes pas connecté.

 

Which device should I select?

sircody01

Junior Member

Which device should I select?

mardi 10 mars 2015, 17:19

I just setup this D5 pump adapter with this reservoir. Now I'm configuring the fill level sensor. Can anyone guide me on which device I should select (see attached screen shot) for proper operation? There are multiple selections and I can't tell which one is the right one.
sircody01 a envoyé l’image suivante :
  • 2015-03-10_10-28-51.jpg

Ce message a été modifié 1 fois. Dernière modification effectuée par "sircody01" (10 mars 2015, 19:35)

InfoSeeker

Senior Member

mardi 10 mars 2015, 20:13

At the end of the Pump Adapter Manual it says:

Citation

Fill level sensor (art. no. 41095 only)
Please refer to the manual “mps”. The sensor installed into the pump adapter is a “mps
pressure ∆40“. Install a pressure equalizing membrane into the top of the reservoir.

So select the ∆40 you have highlighted in your image.

EDIT: be sure to instal the Pressure equalisation membrane mentioned into one of the top ports of the reservoir, or the results will be incorrect.

Ce message a été modifié 1 fois. Dernière modification effectuée par "InfoSeeker" (10 mars 2015, 20:28)

sircody01

Junior Member

mardi 10 mars 2015, 22:54

Ah I see it now. Thank you for pointing out what I overlooked.

Thank you for the warning about the membrane. It is installed as stated.

Discussions similaires