Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Care to explain in more specifics on what you mean by this. If you can, give us images and step by step would be greatly appreciated.If you want to control it via aquabus you have to connect it via USB first and change the mode for each channel. It must be set to allow an external control (aquabus). Please note the configuration possibilities of the aquabus are limited. For example you can not set any effects.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »GTXJackBauer« (5. Dezember 2015, 01:20)
Care to explain in more specifics on what you mean by this. If you can, give us images and step by step would be greatly appreciated.If you want to control it via aquabus you have to connect it via USB first and change the mode for each channel. It must be set to allow an external control (aquabus). Please note the configuration possibilities of the aquabus are limited. For example you can not set any effects.
read this,,helps alot
http://www.namsreviewsandguides.co.uk/
Care to explain in more specifics on what you mean by this. If you can, give us images and step by step would be greatly appreciated.If you want to control it via aquabus you have to connect it via USB first and change the mode for each channel. It must be set to allow an external control (aquabus). Please note the configuration possibilities of the aquabus are limited. For example you can not set any effects.read this,,helps alothttp://www.namsreviewsandguides.co.uk/
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »barfly« (5. Dezember 2015, 05:27)
Thank you for your response.if you go into farbwerk from the a6 side menu box,click farbwerk ,then sensors,then software sensors,theres 4 sensors,select data source and from there aida 64 or hwinfo shows up to select from their sensors
a6 does not show so it cant be used which imop defeats being able to select the water sensor i use in a6 which is primarily what i need.
or you can click to add a new sensor and farbwerk,a6,hwinfo and aida 64 shows up to set data source
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »barfly« (5. Dezember 2015, 07:04)
-