• 06.05.2025, 05:58
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

new octo DOA ?

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

johna

Newbie

Beiträge: 2

new octo DOA ?

Freitag, 12. Juli 2024, 19:14

Hi.

I received an octo from a uk retailer, sealed, have connected it up just the molex and USB and ...nothing. No status light at all. I've checked the USB orientation, checked the molex, switched to a second molex, used a molex to molex extension with a 12v fan adapter to ensure theres 12v there. No life at all. Any suggestions or is this a return ?

Speedy-VI

Senior Member

Beiträge: 866

Samstag, 13. Juli 2024, 00:33

The Octo needs 12VDC and 5VDC to function. Did you check the 5VDC?

InfoSeeker

Senior Member

Beiträge: 1 793

RE: new octo DOA ?

Samstag, 13. Juli 2024, 01:27

Zitat von »johna«

Hi.

I received an octo from a uk retailer, sealed, have connected it up just the molex and USB and ...nothing. No status light at all. I've checked the USB orientation, checked the molex, switched to a second molex, used a molex to molex extension with a 12v fan adapter to ensure theres 12v there. No life at all. Any suggestions or is this a return ?

Zitat

5.10. Status LED
The red status LED is continuously on for approximately ten seconds during startup
and then turned off during normal operation. The status LED is blinking during er-
ror conditions, for example after fan output deactivation due to overload or faulty
supply voltage. In case of errors, RGBpx LEDs connected to the device will be
blinking in red, disregarding the current LED controller setup.

OCTO MANUAL

Speedy-VI

Senior Member

Beiträge: 866

RE: RE: new octo DOA ?

Samstag, 13. Juli 2024, 02:39

Zitat von »InfoSeeker«

OCTO MANUAL
Your link does not work, I think because it is to "file:///D:/Downloads/OCTO_english.pdf']OCTO MANUAL" :wacko:

Here is a LINKto the manual for OP.

johna

Newbie

Beiträge: 2

Samstag, 13. Juli 2024, 08:57

Zitat von »Speedy-VI«

The Octo needs 12VDC and 5VDC to function. Did you check the 5VDC?
Bingo. Only other thing on molex was pump which was only using 12V. I connected the octo to my leak test psu with just a fan and status light came on at power up. Swapped that peripheral connector onto my main system and its booted. Other connector goes in recycling box. Now just have to swap everything else over to octo and test. Thank you very much.

Speedy-VI

Senior Member

Beiträge: 866

Samstag, 13. Juli 2024, 18:49

Zitat von »johna«

Bingo
Yeah! Glad you got it working.

Ähnliche Themen