Hello.

I use two pumps (aquastreams) and i have them connected to my aquaero.

When i open up aquasuite then the status on the pump change all the time from
status: Pump OK
status: Deaeration Mode
Not Connected

even that the pumps are working.
i have seen it once that he changed the pump to
deaeration but only for like say 20 sek then he changed it back.
but i dont like the ide that i leave my computer on and then maybe he change it to deaeration mode.

I have set the adress so that should not be the problem.
do i have to use the first on on the cable to the adress 1?

and i dont have the power connected to the aquastreams.

Firmware is 1.31 on both.

do anyone have any ide what i should test?

Thanks


Edit

here is some pictures so that you can see what i mean.

http://213.113.110.198/aquacomputer/aquastream1.jpg
http://213.113.110.198/aquacomputer/aquastream2.jpg
http://213.113.110.198/aquacomputer/aquastream3.jpg

/Edit

I have now tested to disconnect the tubemeter and now it works.

is there a fix for this?

i have read that if you have problem with the tubemeter and aquastream then you should connect power to both of them, but i dont think that it will solve my problem becourse the power is not my problem becourse the pump workes.

maybe anyone have any ide?

Does it help if i connect the tubemeter throu USB instead?

I have done that now and it worked great.

Thanks for the help.

I will post some image of my computer in next week i guess.

Iam waiting on a couple of connectors from AC i think they will arrive next week.

-edit-

i missread your post

so i dont know what i should type here instead.
Well, AquaComputer for All.

-/edit-

I have a new question.
I have one new pump and one old pump(that i have used for maybe 1 year or so.)

The old one is aquastream 1 and the new is aquastream 2



Why is there so mush difference in Power and consumption?