Wäre mal interessant zu sehen, was du sonst noch alles angeschlossen hast. Der Z170 Platform Controller Hub (PCH) addiert, zu den 16 PCIe-Lanes des Prozessors, noch zusätzliche 8 PCIe-Lanes.
Daran angeschlossen sind meist die SATA- und Ethernet-Anschlüsse, die restlichen PCIe-Steckplätze usw.
Je mehr Erweiterungskarten, HDDs, SSDs, M.2-SSD auf Mainboard etc. du installierst, desto weniger PCIe-Lanes stehen den PCIe-Steckplätzen zur Verfügung, was die geringe M.2-Geschwindigkeit erklären würde.
Du hast die Karte ja in einem PCIe x1 3.0-Steckplatz stecken, richtig? Max. Bandbreite davon 985 MB/s ohne overhead. Mit overhead, denke ich mal, würden 825 MB/s wie in deinem Fall dabei herauskommen.
Das Interface deiner M.2-SSD unterstützt jedoch PCIe x4 3.0, also max. 3938 MB/s ohne overhead. Hinzu kommt noch, ob der Steckplatz 3.0 oder 2.0 angebunden wird.
Expansion Slots 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be
sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics
cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2
slots.
2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2
slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode
when the PCIEX8_1/PCIEX8_2 is populated.
(The PCI Express x16 slots conform to PCI Express 3.0 standard.)
3 x PCI Express x1 slots
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
http://download.gigabyte.eu/FileList/Man…gaming-g1_e.pdf
http://www.intel.de/content/www/de/de/ch…70-chipset.html
https://de.wikipedia.org/wiki/PCI_Express