A very beautiful System. I love it .
And very good Pictures.
Wich Grafikcards do you use for your System?

nice connection between the ramplex.
Is the whole hardware in one cooling loop or do you split it?
And the 90° quick release coupling on the cuplex looking very nice too.

OMG very nice system, I like it!

Holeeee... What a system. You really just ordered "one of everything, except where larger quantity specified" eh? Is that a stock case?

just curious: how much vcore is needed for 5ghz on your 990x to be linx-stable?

i can bench with my 990x on 5ghz with 1.6v, but to be fully stable it requires far more than that and so goes the temps... btw: with all cores fully loaded (eg. with linx), how hot does your 990x get?

thats pretty much what i got with my 990x. but for 24/7 i'm not willing to give more than 1.56v and here is 4.8ghz all there is. i guess my chip is all right then. i thought it needed a little to much volts for that but it seems all is in line, so thanks.

but suddenly i'm not so sure if i fit my cuplex kryos right. i got @4.8ghz (1.56v) ~85-90c under full load with around 40c water. i'm too using arctic cooling mx4. expected around 70/75c something...

yeah i know, radiators. can't have enough of them...
it's only 1 loop. i just wanted to keep all in one case though, just makes the case look very slick.
i'm using 1 radiator (420 ams from ac) with 4 blocks (1 cpu, 1 gpu (6970), 1 chipset and 1 raid controller).
but 30c water in the cpu-loop when the cpu gets to the 90s seems a bit low, does it?

after half an hour of full load on my cpu i got ~36-37c water after the radiator (cpu comes first in loop) and ~41-42c before the radiator. thats what i mean with 'around 40c water', so i guess it's ok.


just another question: i noticed that you use 3 ramplex for the 6 modules you have. is that necessary or will 2 ramplex also fit just fine? i have an asus rampage 2 extreme motherboard and the spacing between the ram-slots is just like on your gigabyte board. the 2 slots for one memory channel lay exactly next to each other with a little (~2mm) space between slots from different channels.
it just looks a little awkward with the 3 ramplex being so much wider than the memory slots itself.

Zitat von »Phatboy69«

Unfortunately the ramplex are too wide to lineup properly with this memory layout and not wide enough for just two.

hmmm... thats bad.

are you using that machine for gaming only or are you doing reasonable stuff with it, too? ;-)