Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Zitat
Q1: Unsure what the Aquabus connects too. Do I connect that to the Multiswitch? If so, then what is the advantage as I understand I don't need the USB connection from the Multiswitch to the Mother board?
Zitat
Q2: What is the Expansion Slot ment to be connected too?
Zitat
Q3: Relay emergency shutdown, is this recommented and where do you get the cable for this?
Zitat
Q4: I assume that as the fans are infact small motors, I need to fit a self-induction recuperation diode and a 100 nF capacitor to the consumer to prevent intererences with the Mulitswitch, is this true?
Zitat
Q5: Will the Multiswitch allow me to change the voltages of the fans between 12v, 7.5v and 5v with the software interface, or is it simply 12v on and off? This allows me to change the fan speeds and so the sound output of the fans.
Zitat
Q6: The Aquastream connection is not used due to the Aquero connected to the Aquastream, is this correct?
Zitat
Q7: Unsure what the Aquabus connects too. Do I connect that to the Aquaero? If so will I loose some useful functionality in controlling the Jumper 3 (PWM function)?
Zitat
Q8: What device is the RPM-signal connection for?
Zitat
Q9: Do I connect that straight to the Mother board, and how does the Aquaero know if the water leaks out?
Zitat
Q10: Can you see anywhere where I have mis-understood the aquacomputer products and I am likely to damage anything?
Zitat von »Shoggy«
DO NOT connect the molex connector to the aquastream AND aquaero at the same time. This is only recommed if you encounter problems with the aquastream - most likely when you connect the tubemeter too.
-