23.07.2025, 19:00
Change Language
Register
Login
You are not logged in.
alexkyriak
Full Member
Friday, September 16th 2022, 11:18pm
Just been fiddling with that Wired XDisplay and an old iPad mini. Quite good actually. Nice and neat on the desk. Still setting up a dashboard design in Aquasuite but that's easily adjustable. Was sort of intrigued by a small HDMI screen as an alternative but might stick with this for a little while, see how it works out.
alexkyriak
Full Member
Friday, September 16th 2022, 11:37pm
Yep, by Splashtop. Idea credit is thanks to WinstonWoof for suggesting it earlier in the thread. I think it's free from what I can see. It behaves literally like having an additional monitor, it appears in Windows Settings Display, but not in NVIDIA Control Panel interestingly.
alexkyriak
Full Member
Saturday, September 17th 2022, 10:23pm
Hi, yes it's very easy to change the types. When you create a new item you're presented with options:
When you're in some items you can change their representation:
I think the circular guage is a unique item type however, can't change it from a circular guage to a bar graph as far as I am aware. Bar graphs are part of the Detailed Data item type. There are other members on here who are way more experienced than me on these matters, however, so hopefully one of them can provide a better answer, but hopefully this helps a bit.
When you're in some items you can change their representation:
I think the circular guage is a unique item type however, can't change it from a circular guage to a bar graph as far as I am aware. Bar graphs are part of the Detailed Data item type. There are other members on here who are way more experienced than me on these matters, however, so hopefully one of them can provide a better answer, but hopefully this helps a bit.
dfmastin
Junior Member
Monday, September 26th 2022, 1:46am
Any followup? thank youHm. Little bit of possible bad news on this one. I'm finding when I run this, after a while I'm getting crashes. The error is a timeout watchdog error, which is normally (I think) related to overclocked CPUs. So whilst my system is OCed, it'll crash if running either my (perhaps overly-complex) Aquasuite dashboard page, or the XDisplay - need to find out which it might be. Crashes can happen whilst in the middle of a demanding game (CP2077) or browsing, or sometimes (but need to verify) just using Aquasuite. Have stopped using both Auqasuite dashboard and XDisplay and errors just don't appear. Will keep testing.
Caldorian
Junior Member
Monday, September 26th 2022, 10:29pm
For the radial gauges on mine, I simply put one on top of the other. Lining them up can be fiddly and you’ll need to track their sizes in pixels and ensure they’re centred to one another, but it’s actually quite easy to set up and use. You just need to make the outer one(s) bigger then line it up. I turned off a lot of the text associated with the gauge and replaced it with standalone text. Not sure how to code them if that’s possible. Let me know if this helps or not!
Thanks, I figured that they were just dual-stacked guages. Any chance that a page/component can be shared to save on the hard work of getting them all lined up
dfmastin
Junior Member
Friday, September 30th 2022, 3:38am
This looks really good. I like the simplicity and colors. I keep thinking you are sitting in a stock broker's office high in a skyscraper with an amazing view of "the bay."Just been fiddling with that Wired XDisplay and an old iPad mini. Quite good actually. Nice and neat on the desk. Still setting up a dashboard design in Aquasuite but that's easily adjustable. Was sort of intrigued by a small HDMI screen as an alternative but might stick with this for a little while, see how it works out.
I guess it's the wallpaper. In any case, nice work.
Remayz
Senior Member
Friday, September 30th 2022, 11:00am
i personally love the blacked out dashboard, so i'm going to redo mine on that general design, trying to use Xdisplay with a smartphone instead of a tablet. Condensing the current dashboard is going to be.. challenging :p hopefully i'll come up with something to share later on 
Teknophage
Junior Member
Friday, October 7th 2022, 8:12am
Wow. That's slick. I hope you won't mind if I attempt to steal model my next screens after yours!Just been fiddling with that Wired XDisplay and an old iPad mini. Quite good actually. Nice and neat on the desk. Still setting up a dashboard design in Aquasuite but that's easily adjustable. Was sort of intrigued by a small HDMI screen as an alternative but might stick with this for a little while, see how it works out.
Here's what I have presently -- two pages I can switch between on an 12" HDMI screen in portrait mode:
alexkyriak
Full Member
Tuesday, October 11th 2022, 11:17pm
Lol steal away
Here is my 'finished' first attempt. Will keep refining and tinkering. Aim was to go for simplicity, 'easy on the eye', very graphic and easy to read.
The primary bit of info I designed it around was the multi guage dials, reading my water temp vs ambient, with a delta for the ambient temp vs water temp (blue and green text centre top left), with outer graphic readouts for GPU core and temp, and CPU core and temp. It's also showing graphs of the same, giving me history of the readouts.
Dual pumps on far top left, bottom pump and top pump (in series, set to slightly different speeds), and CPU performance core readouts centre, below the GPU / CPU bars.
Disk space and temps bottom right.
Bottom left is simply ambient air temp plotted with water temp and delta, as a graph, to show history.
Here is my 'finished' first attempt. Will keep refining and tinkering. Aim was to go for simplicity, 'easy on the eye', very graphic and easy to read.
The primary bit of info I designed it around was the multi guage dials, reading my water temp vs ambient, with a delta for the ambient temp vs water temp (blue and green text centre top left), with outer graphic readouts for GPU core and temp, and CPU core and temp. It's also showing graphs of the same, giving me history of the readouts.
Dual pumps on far top left, bottom pump and top pump (in series, set to slightly different speeds), and CPU performance core readouts centre, below the GPU / CPU bars.
Disk space and temps bottom right.
Bottom left is simply ambient air temp plotted with water temp and delta, as a graph, to show history.
Speedy-VI
Senior Member
RE: Before the modulo function was invented. LOL
Saturday, January 13th 2024, 9:46pm
This is interesting. I have not quite comprehended the logic flow but I don't see what the bottom X=round(A) does, or the blocks upstream of it. The output does not go anywhere.I wanted to display system uptime in dd:HH:mm but I couldn't find such data source. Under Functions, there's no modulo either.
Edit to add - I also think I found a bug in Aquasuite. When you select the Round Niumber function, there is a pull down where you can select how the Rounding works. The selections that appear are Normal (Round up and down), Rounding down, Rounding Down. It seems odd that Rounding down would be listed twice, and it seems logical that if there is a Rounding down function, there would also be a Rounding up function. I tested this and the second Rounding down option in the pull-down is actually Rounding up. It would be nice if the type of Rounding was indicated in the X=round(A) block. It took me a while to figure out why X=A=0.68 rounded to 0 in your flow until I realized you used Rounding down. That led me to look at the Rounding options pulldown, where I saw Normal (Round up and down), Rounding down, and then Rounding down again which is really Rounding up. It seems pretty clear that Rounding up is labelled incorrectly in the pull down.
aquaman2030
Junior Member
Sunday, January 14th 2024, 1:23am
I reuse the same diagram for Days Hours and Minutes since they're inter-related. The portion that you highlighted is for Minutes and for that 'sensor' there would be a blue output box for that value. Same for Days 'sensor'
Quoted
This is interesting. I have not quite comprehended the logic flow but I don't see what the bottom X=round(A) does, or the blocks upstream of it.The output does not go anywhere.
Yup, I've appended that observation under my Feature request post. I'm not sure if Aquacomputer looks into these posts.
"Edit to add - I also think I found a bug in Aquasuite. When you select the Round Number function, there is a pull down where you can select how the Rounding works. The selections that appear are Normal (Round up and down), Rounding down, Rounding Down. It seems odd that Rounding down would be listed twice, and it seems logical that if there is a Rounding down function, there would also be a Rounding up function. I tested this and the second Rounding down option in the pull-down is actually Rounding up. It would be nice if the type of Rounding was indicated in the X=round(A) block. It took me a while to figure out why X=A=0.68 rounded to 0 in your flow until I realized you used Rounding down. That led me to look at the Rounding options pulldown, where I saw Normal (Round up and down), Rounding down, and then Rounding down again which is really Rounding up. It seems pretty clear that Rounding up is labelled incorrectly in the pull down."
Similar threads
-
English forum »-
Aquaero 6XT and Poweradjust 3 help Please
(Feb 23rd 2016, 11:18pm)
-
- English forum »
-
Aquasuite 2015-5
(Apr 16th 2015, 8:57am)
-
- English forum »
-
Aquasuite not showing flow rate.
(Nov 19th 2010, 5:36am)
-
- Software, allgemein »
-
Coole Apple Softwaregimmicks
(Apr 3rd 2005, 2:24pm)
-
- Hardware, allgemein »
-
Auslesen der Temps von FP mit internem Sensor
(Sep 4th 2002, 4:25am)