• 25.08.2026, 22:19
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Ampinel Aquacomputer will not fit my GPU. Is a 12vhpwr cable extender suitable?

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

Gumbythebrainiac

Newbie

Ampinel Aquacomputer will not fit my GPU. Is a 12vhpwr cable extender suitable?

Montag, 10. August 2026, 14:36

Ampinel Aquacomputer A/B will not fit my card due to tall CPU heat sink. Is it advisable to use a 12vhpwr cable extender in between my GPU and the Ampinel Aquacomputer?
So the chain would be; GPU > 12vhpwr cable extender > Ampinel Aquacomputer > GPU to PSU 12vhpwr adapter (the multi connector that came with the GPU) > PSU
Would that work? I 'd really appreciate some advice
Thanks. :)

Shoggy

Sven - Admin

Montag, 10. August 2026, 16:15

That would work but is not recommend as it can increase the contact resistance and also adds another point of possible failure.

InfoSeeker

Senior Member

RE: Ampinel Aquacomputer will not fit my GPU. Is a 12vhpwr cable extender suitable?

Montag, 10. August 2026, 16:36

Zitat von »Gumbythebrainiac«

Ampinel Aquacomputer A/B will not fit my card due to tall CPU heat sink. Is it advisable to use a 12vhpwr cable extender in between my GPU and the Ampinel Aquacomputer?
So the chain would be; GPU > 12vhpwr cable extender > Ampinel Aquacomputer > GPU to PSU 12vhpwr adapter (the multi connector that came with the GPU) > PSU
Would that work? I 'd really appreciate some advice
Thanks. :)

Do you have your GPU under water?
If so, you may be able to use an "A" instead of a "B" connector (or vice versa) and have the cable run on the other side of the GPU (LINK)
If air cooled it probably will not work as the cooler is too thick

MTM

Junior Member

Montag, 10. August 2026, 17:00

time to switch from a big CPU Fan cooler to a smaller CPU AIO Watercooler. :)

Gumbythebrainiac

Newbie

Montag, 10. August 2026, 18:12

Zitat von »Shoggy«

That would work but is not recommend as it can increase the contact resistance and also adds another point of possible failure.
I see, but would the device still work as intended?

Ähnliche Themen