Hi all,
I've had my Ampinel for about 3-4 weeks. I have not played a ton on my computer, but I did play cyberpunk about 2-3 hours efter attaching the Ampinel. I had some time today, where I could play. Just before starting, I updated Aquasuite to X.93, and that prompted a firmware update of the Ampinel. First, I had to reboot and disconnect power for the update to work, but in the end the firmware update was succesful.
However, after the latest update I now have problems:

1. Current pin 2 on input is now yellow
2. Pin 2 generally supplies 1/2 the current of the other connectors.
3. I now get differential current alarms when I play cyberpunk. I get them within 1-2 minutes of playing the game. Nothing interesting is happening on the screen. From what I can see it is the differential between pin 6 and pin 2 that are too high
4. If I run the cable benchmark inside aquasuite, I get no alarms - even at 602W power draw.

What should I do next? Should I try and fiddle with the cables?
Could the firmwareupdate of the ampinel have made it more sensitive? Everything seems quite normal, even the connector temps are not that high, 42 C or so
I currently am in the phone, but can provide screenshots.
System:
9800x3d
X870 Tomahawk
64 GB corsair DDR6000 RAM
Inno3d frostbite 5090
MORA IV 400