05.01.2026, 02:21
Change Language
Register
Login
You are not logged in.
Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Franklin
Full Member
Re: casemod:AlumaxX
Saturday, March 5th 2005, 12:04am
The aluminium frontplate is ready.
Here you see the aluminium and acrylic plates.
The two plates together.
Testfit of the front in the case.
Both plates will have to be cleaned and polished. That's why I bought a polishing machine.
The next thing that has to be done is cutting the aluminium for the ejectbuttons and the DVD drives. The acrylic parts are already finished.
Here you see the aluminium and acrylic plates.
The two plates together.
Testfit of the front in the case.
Both plates will have to be cleaned and polished. That's why I bought a polishing machine.
The next thing that has to be done is cutting the aluminium for the ejectbuttons and the DVD drives. The acrylic parts are already finished.
Franklin
Full Member
Re: casemod:AlumaxX
Saturday, March 26th 2005, 7:31pm
The final parts have arrived. The last parts for the watercooling.
and last but not least the CPU
First I have to finish the paper model for the covers from the motherboard and the baydrives.
When the model is ready I will start making it from an aluminium plate.
and last but not least the CPU
First I have to finish the paper model for the covers from the motherboard and the baydrives.
When the model is ready I will start making it from an aluminium plate.
Franklin
Full Member
Re: casemod:AlumaxX
Sunday, March 27th 2005, 3:32pm
Quoted from "damadi"
Great Job that you did here (in your kitchen?!) - Do you have a picture of how you fastened the hdd drivebays? do you screw them directly to the case or will there be some couplers between?
I used the rubber couplers that came with the Aquadrives. In fact the mounting of the two Aquadrives is just the same as a normal installation in one of the baydrives.
Franklin
Full Member
Re: casemod:AlumaxX
Sunday, April 3rd 2005, 4:03am
link=board=2;num=1106952769;start=45#54 date=04/03/05 um 01:21:26]franklin, worden de chips van je mainboard niet te heet als je deze aluminium plaat erop monteert ?
franklin, werden die bausteine von deinem mainboard nicht zu warm wenn du die alu platte da druff packst ?
The fans from the radiator on top suck the air over the motherboard, the motherboardcover acts like an airduct.
Und ich habe Deutsch gelernt aber meine Deutsche Sprache ist nicht so gut. Wenn jemand etwas fragen will kann dass aber, lesen ist kein Problem. Ich denke meine deutsche Sprache ist besser als eure Niederlandsche Sprache ;D 4
damadi
Full Member
Re: casemod:AlumaxX
Sunday, April 3rd 2005, 4:08am
The fans from the radiator on top suck the air over the motherboard, the motherboardcover acts like an airduct.
Und ich habe Deutsch gelernt aber meine Deutsche Sprache ist nicht so gut. Wenn jemand etwas fragen will kann dass aber, lesen ist kein Problem. Ich denke meine deutsche Sprache ist besser als eure Niederlandsche Sprache ;D 4
ist doch gut! bis auf ein paar komma-fehler! manche deutsche sind nicht mal in ihrer muttersprache grammatikalisch in der lage korrekt ne pizza zu bestellen - geschweige denn alternativ in englisch
