16.06.2025, 11:34
Sprache ändern
Registrieren
Anmelden
Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
InfoSeeker
Senior Member
Samstag, 13. Februar 2016, 01:15
Great!
I know I made one request above, and, well, I would like to present a second request as hope springs eternal
Currently, the "title" in aquasuite objects displayed on the desktop have the option for a user defined title in addittion to the default.
It would be most useful if the same approach could be taken to the "unit" name for the variable being displayed in a object.
This would be useful for items brought in via the Windows Services option, in that the imported information may have a "unit" that is not covered in the existing aquasuite "units" list.
For instance, the UPS battery status is displayed in minutes remaining, but aquasuite does not understand the provided unit and it is ignored.
If a similar procedure for title naming is implemented for "units", then the issue melts away.
Example of missing unit:
EDIT: added example.
I know I made one request above, and, well, I would like to present a second request as hope springs eternal
Currently, the "title" in aquasuite objects displayed on the desktop have the option for a user defined title in addittion to the default.
It would be most useful if the same approach could be taken to the "unit" name for the variable being displayed in a object.
This would be useful for items brought in via the Windows Services option, in that the imported information may have a "unit" that is not covered in the existing aquasuite "units" list.
For instance, the UPS battery status is displayed in minutes remaining, but aquasuite does not understand the provided unit and it is ignored.
If a similar procedure for title naming is implemented for "units", then the issue melts away.
Example of missing unit:
EDIT: added example.
InfoSeeker
Senior Member
Montag, 15. Februar 2016, 15:30
Agreed, there are values without units, particularly switch state items, yes/no, on/off, etc.
And most sensor values use core units, volts, amps, RPM, temperature, percent, Hz.
But some sensor value units are unique, i.e. Min(utes), MB/s.
As system monitoring programs expand the devices they look at, the resultant sensor value units may be unknown to aquasuite.
My request was predicated on the concept of it being inconsequential if a particular unit type is not recognized, by allowing user defined units, similarly to what you do with sensor titles.
In the sample screenshots below the unit of interest is Min(utes).
And most sensor values use core units, volts, amps, RPM, temperature, percent, Hz.
But some sensor value units are unique, i.e. Min(utes), MB/s.
As system monitoring programs expand the devices they look at, the resultant sensor value units may be unknown to aquasuite.
My request was predicated on the concept of it being inconsequential if a particular unit type is not recognized, by allowing user defined units, similarly to what you do with sensor titles.
In the sample screenshots below the unit of interest is Min(utes).
Kyle XY
Full Member
Samstag, 20. Februar 2016, 21:14
Hi all,
Aquasuite 2015-9 coupled with my Aquaero 5 is a very good software.
The visual aspect of my page is quite basic but very useful.
I have regularly problems of AquaComputer not active at Windows start, but I read that is a known issue.
At last, I would have preferred having a more direct control on my PWM DDC pump with rpm or % under the "controllers" page, rather than having to manage minimum power item Under the "Fans" page.
Anyway... Maybe it's time for an Aquasuite upgrade to 2016 version. Is the last version completely OK ?
Thanks.
Aquasuite 2015-9 coupled with my Aquaero 5 is a very good software.
The visual aspect of my page is quite basic but very useful.
I have regularly problems of AquaComputer not active at Windows start, but I read that is a known issue.
At last, I would have preferred having a more direct control on my PWM DDC pump with rpm or % under the "controllers" page, rather than having to manage minimum power item Under the "Fans" page.
Anyway... Maybe it's time for an Aquasuite upgrade to 2016 version. Is the last version completely OK ?
Thanks.
InfoSeeker
Senior Member
Montag, 14. März 2016, 23:19
this is a bigger change in the aquasuite data handling - we have this and some other features in plan.And a minor disappointment that errant/missing sensor units correction/addition was not addressed.
sensorunit.jpg
Oooh,looking forward to the addition.
I don't know if implemented this release or earlier, but I see you have expanded the character set so we can use the Delta (Δ) symbol also. Very nice.
sebastian
Administrator
Dienstag, 15. März 2016, 14:47
this is currently when we cant read a valid unit. we are in contact with the aida64 team.I noticed a couple anomalies regarding Sensor Units transferring from Aida64 via Shared Memory.
Some Units that should be Watts or % are all showing as Volts by aquasuite.
units.jpg
In the next version this issue is fixed and some more units are supported.
InfoSeeker
Senior Member
Dienstag, 15. März 2016, 20:38
.. try to replace this dll (unzip the zip file)
in the folder:
Quellcode
replace the file:
Quellcode
[attach]5645[/attach]
I am Having a bit of difficulty.
Downloaded & unzipped PluginImportAida64.dll
turned off Windows Services in the aquasuite settings panel, and closed aquasuite
copied the new PluginImportAida64.dll over the old (C:\Program Files\aquasuite\Plugins\PluginImportAida64.dll)
restarted aquasuite and restarted Windows Services
now aqausuite detects none of the Windows Services available
system.jpg
when I reverse the operation and reinstall the old PluginImportAida64.dll, the Windows Services works again
system1.jpg
InfoSeeker
Senior Member
Samstag, 26. März 2016, 01:49
I have the Aquero 6 Pro. I went through some hell when I updated to 2016 - 3 from 2014/2.3. I did the update on top of 2014, didn't uninstall it but it wasn't running.
The problem started when everything went 100%, fans and pump. The firmware never succeed to update so I couldn't use the program. I managed to find my old software 2014, installed it, but no features in the aquaero tab where showing up, so I couldn't roll back and use it. System restore didn't fix it either. I deleted the software and installed 2016 - 3 again, did the firmware update and succeed, now I have to fix my old fan/pump settings.
Please advise how to update the software so it don't happen like this again.
When you upgraded from 2014/2.3 to 2016-3 you should have had to update the aquaero firmware also, once that is done you cannot go back to 2014.
The upgrade automatically saves the aquaero's profile prior to updating the software.
To retrieve your last profile, go to aquaero > System > Settings and profiles...
then click on the "Import settings from file" option, and import the last saved profile.
import.jpg
Ähnliche Themen
-
Wasserkühlung »-
Neu: aquasuite 2016-4
(28. Januar 2016, 14:08)
-
- Wasserkühlung »
-
aquasuite 2015 Version 9
(5. Dezember 2014, 11:07)
-
- English forum »
-
Aquasuite USB problem / Finally not fixed :(
(3. Januar 2016, 21:53)
-
- Wasserkühlung »
-
Gigant 3360
(26. Juli 2015, 13:52)